ActiveRecord::HashlikeAccess

Pulling this module into your ActiveRecord models gives you Hash-like getters ([]) and setters ([]=) for individual records/values. This is not only slightly cleaner to read/write, but also encourages fetching items by either their id or a canonical "lookup field", minimizing the likelihood of pulling records by an unindexed field.

In simplest terms:

# Given a "roles" table with
# `id`, `name`, and `display_text`...


# Hash-Like Access to Records:

class Role < ApplicationRecord
  extend ActiveRecord::HashlikeAccess
  hashlike_access by: :name
end

role = Role.find_by name: name
# ... becomes ...
role = Role[name]


# Hash-Like Access to Values:

class Role < ApplicationRecord
  extend ActiveRecord::HashlikeAccess
  hashlike_access to: :display_text, by: :name
end

role_display_text = Role.find_by(name: name).display_text
# ... becomes ...
role_display_text = Role[name]

Role.find_by(name: name).update! display_text: new_display_text
# ... becomes ...
Role[name] = new_display_text

Importantly, note that this gem works on the model, not its relations. ActiveRecord's existing bracket constructs for referencing relations (i.e. resultsets) in an Array-like fashion will continue to work as they always have.

Full documentation is available here, but do read below for a crash course on availble featues!

• If your project uses Bundler:

  • Add one of the following to your application's Gemfile:

    # For on-demand usage:
    
    gem 'activerecord-hashlike_access'
    
    
    # To automatically `extend ActiveRecord::HashlikeAccess`
    # into all your (`ActiveRecord::Base`-descended) models:
    
    gem 'activerecord-hashlike_access', require: 'active_record/hashlike_access/auto_extend'

  • And then run a:

    $ bundle install

• Or, you can keep things simple with a manual install:

  $ gem install activerecord-hashlike_access

Incorporating the ActiveRecord::HashlikeAccess module into a model will allow you to access it by a hash-like syntax, with the entrypoints for defining what you would like access to and how you would like to access it being the hashlike_access and hashlike_access! methods.

These two methods are nearly identical, the only difference being that a hashlike_access lookup that finds no matching records will return a nil (similar to ActiveRecord's find_by), whereas a failed hashlike_access! lookup will instead raise ActiveRecord::RecordNotFound (as a find_by! would).

hashlike_access/hashlike_access! take two arguments:

• to (optional): the field (or arity-0 method) whose value you would like to get back for hash-like lookups; if omitted, the full record is returned
• by (optional): the field by which you would like to find matching records; if omitted, the model's primary key is used

If your model pulls from ActiveRecord::HashlikeAccess but does not explicitly call one of these methods, the default behaviour will grant you hash-like access to records by the model's primary key.

class YourModel < ApplicationRecord
  extend ActiveRecord::HashlikeAccess

  # For implicit access to records BY the primary key,
  # you can omit the `hashlike_access` call altogether.

  # ...


  # For explicit access to records BY the primary key,
  # call `hashlike_access` while omitting the `to` option:

  hashlike_access by: primary_key


  # For access to records BY an arbitrary "lookup field",
  # give `hashlike_access` the 'by' field and no 'to' option:

  hashlike_access by: :some_lookup_field_name

end

Any of the above options will make hash-like access (YourModel[some_value]) equivalent to a find_by (or a find_by!, in the case of hashlike_access!) using the requested field, resulting in:

• the matching record, if one is found
• a nil value, in the case of hashlike_access
• an ActiveRecord::RecordNotFound error, in the case of hashlike_access!

class YourModel < ApplicationRecord
  extend ActiveRecord::HashlikeAccess

  # For access TO a specific value for records matched BY the primary key,
  # `hashlike_access` needs the target name via 'to', but the 'by' is optional:

  hashlike_access to: :field_or_method_name
  # ... or ...
  hashlike_access to: :field_or_method_name, by: primary_key


  # For access TO a specific value BY an arbitrary "lookup field",
  # give `hashlike_access` both the 'to' target and the 'by' field:

  hashlike_access to: :field_or_method_name, by: :some_lookup_field_name

end

Any of the above options will make hash-like access (YourModel[some_value]) equivalent to a find_by/find_by! followed by the requested method call. As with record lookups: if no matching record is found, expect a nil value or an ActiveRecord::RecordNotFound error, depending on whether you use hashlike_access or hashlike_access!.

Requesting hash-like access to a value (see above) also makes hash-like assignment ([]=) available provided that makes sense, i.e.:

• You have hash-like access to a field and the model is not read-only:

  class YourModel < ApplicationRecord
    extend ActiveRecord::HashlikeAccess
    hashlike_access to: :field_x
  end
  
  # Getting a value:
  field_x = YourModel[some_key]
  
  # Setting a value:
  YourModel[some_key] = new_value_for_field_x

• You have hash-like access to a method and there is also a corresponding = method for it:

  class YourModel < ApplicationRecord
    extend ActiveRecord::HashlikeAccess
    hashlike_access to: :method_x
  
    def method_x
      # ...
    end
  
    def method_x=(value)
      # ...
    end
  end
  
  # Getting a value:
  method_x = YourModel[some_key]
  
  # Setting a value:
  YourModel[some_key] = value_to_pass_to_method_x_assignment

  If you attempt a hash-like value assignment and the requisite assignment method has not been defined, a NoMethodError will be raised.

Note hash-like value assignments are backed by an update! call, which will:

• run validations, possibly raising an ActiveRecord::RecordInvalid error
• trigger callbacks, possibly raising an ActiveRecord::RecordNotSaved error
• update timestamps

If your model uses a composite primary key, hash-like access happens by passing all the needed values:

class YourModel < ApplicationRecord
  extend ActiveRecord::HashlikeAccess
  self.primary_key = [:primary_key_1, :primary_key_2]
end


# You need to provide as many key values
# as there are fields in the primary key:

record = YourModel[1, 2]
# ... or if you have an array:
record = YourModel[*key_values]

You can also do this if you want to use multiple non-primary-key lookup fields by passing an array to the by option:

class YourModel < ApplicationRecord
  extend ActiveRecord::HashlikeAccess
  hashlike_access by: [:lookup_field_1, :lookup_field_2]
end


# You need to provide as many key values
# as there were fields in the "by" option:

record = YourModel[1, 2]
# ... or if you have an array:
record = YourModel[*lookup_values]

Every instance of a hash-like lookup ([some_key]) is backed by a find_by/find_by! call, but ActiveRecord's query cache goes a long way to reducing the performance penalty from repeated calls for the same record within a single worker.

As with anything ActiveRecord-related, there are ways to shoot yourself in the foot if you're not careful. Here are a few items to keep in mind and hopefully prevent this:

• The hash-like access construct is essentially syntax sugar around ActiveRecord's find_by mechanism. For many (most?) database engines, selecting (or including, in the case of a multi-field key) an unindexed field for your lookups will likely result in a full-table scan with every hash-like access. Be mindful of what field(s) you're using as your key(s).

• Selecting a lookup field with non-unique values means the matching record you get back is non-deterministic unless you take precautions to avoid this (e.g. by setting a default scope with an order on fields that yield a unique combination of values). This should go without saying, but: maybe don't use a non-unique field to try to find a specific record?

Bug reports and pull requests are welcome at: https://github.com/nestor-custodio/activerecord-hashlike_access

After checking out the repo, run bin/setup to install dependencies. Then, run rake spec to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

Linting is courtesy of Rubocop (rake rubocop) and documentation is built using YARD. Please ensure you have a clean bill of health from Rubocop and that any new features and/or changes to behaviour are reflected in the adjacent documentation before submitting a pull request.

ActiveRecord::HashlikeAccess is available as open source under the terms of the MIT License.