No release in over 3 years
Low commit activity in last 3 years
Bystander for Blabbermouth that posts to New Relic
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies

Development

>= 0
>= 0

Runtime

 Project Readme

Blabbermouth

Build Status Coverage Status Code Climate Gem Version Dependency Status

An interface that blabs your business (errors, logging, instrumentation, etc.) to listening bystanders. There are a number of core bystanders provided, either built-in or through additional gems, for things like stdout, rails logger, rollbar, librato, etc.

When using blabbermouth you can configure which bystanders are listening in to the events and messages being reported, which allows you to easily log/track/instrument your application across multiple services. For example, the librato and rollbar bystanders can be powerful when used alongside one another, in order to do things like graph success vs. error rates in Librato and report the full corresponding exceptions and backtraces to Rollbar.

Blabbermouth can also provide redundancy by reporting to multiple services and is a great way to test out new providers (think Librato vs. New Relic), or to A/B test things like messaging queues when evaluating new gems or third party services.

Getting Started

Add the blabbermouth gem to your Gemfile:

gem 'blabbermouth'

Then run bundle install.

You can also install additional bystanders by adding the appropriate gem(s) to your Gemfile. For example, if you wanted to use the rails logger and rollbar:

gem 'blabbermouth'
gem 'blabbermouth-rails'
gem 'blabbermouth-rollbar'

By default blabbermouth is configured with the stdout bystander, which will log all messages to standard output. If you use the blabbermouth-rails gem, this is overridden and defaults to the rails logger. This means that when you call something like Blabbermouth.error without telling it which bystanders you'd like listening, the defaults will be used.

If you want to set a different default bystander or add other bystanders to the defaults, you can configure blabbermouth to do so (usually in /config/initializers/blabbermouth.rb):

Blabbermouth.configure do |config|
  # Replace the default bystander with Rollbar and Librato
  config.bystanders = [:rollbar, :librato]

  # Or add Rollbar to the existing default bystanders (either :stdout or
  # :rails depending on what gems you're using)
  config.bystanders << :rollbar
end

Usage

The simplest way to start using blabbermouth is to just call the provided core methods directly on the Blabbermouth module:

# info - logs an event as info with an optional message and data hash
Blabbermouth.info('my_app.some_namespace.my_action', 'App did something', data: {some: 'other data'})

# error - logs an exception with an optional data hash
begin
  # do stuff
rescue => e
  Blabbermouth.error('my_app.action.failed', e, data: {other: ['arguments', 'can go here']})
end

# increment - increment a counter (or log a 'tick' depending on the bystander) with an optional integer and data hash
Blabbermouth.increment('my_app.some_counter', 3) # increment by 3, default is 1

# count - log a total count with an optional data hash
Blabbermouth.count('my_app.total_things', 250)

# time - logs a timed duration with an optional data hash, can execute and time a block for you
Blabbermouth.time('my_app.some_job.execution_time', 30, data: {job_args: {whatever: 'stuff'}})
Blabbermouth.time('my_app.my_block.execution_time') do
  sleep 30
end

This will use the default configured bystander(s), but you can also override those defaults when calling the method:

# blabs an error to librato and rollbar, will NOT post to the default bystanders
Blabbermouth.error('my_app.some_action.failed', e, :rollbar, :librato, data: {key: 'value'})

# you can also instantiate an object and call your method on that if you prefer that syntax (I usually do :)
Blabbermouth.new(:rollbar, :librato).error('my_app.some_action.failed', e, data: {key: 'value'})

# if you want to post to your default bystander as well, you'll have to specify it
# this example assumes your default bystander is configured as :stdout
Blabbermouth.new(:stdout, :rollbar, :librato).error('my_app.some_action.failed', e)

# or you could reference the configured defaults to be a bit more dynamic
bystanders = Blabbermouth.configuration.bystanders + [:rollbar, :librato]
Blabbermouth.error('my_app.some_action.failed', e, *bystanders)

You can also instantiate a Blabbermouth::Blabber object, pre-configured with bystanders, then re-use that object without needing to override the defaults for every method call.

# create a blabber that will blab to the rails log and to librato
blabber = Blabbermouth::Blabber.new(:rails, :librato) # Blabbermouth.new will also work
blabber.increment('my_app.my_key') # increment a librato counter by 1 and log the increment action to the rails log

If you happen to be using a custom bystander and you've defined additional methods you'd like to use with blabbermouth, there is some metaprogramming to allow you to do so fairly easily. You cannot use the direct Blabbermouth.my_method syntax, but you can instantiate a Blabbermouth::Blabber with your bystander and call your method through that object. For example, if you've defined a bystander that has a gauge method (which is not defined currently as part of the core set of methods), you can still call that method through your blabber object:

# create a blabber using your custom bystander
blabber = Blabbermouth::Blabber.new(:my_bystander)
blabber.gauge('my_app.some_key', my_args) # calls the #gauge method on your bystander

Blabbermouth will check whether a bystander responds to a method before trying to call it, which means you can mix and match bystanders and even if you call a method not supported by one, the rest will still be called.

# create a blabber using your custom bystander and the rails logger
blabber = Blabbermouth::Blabber.new(:my_bystander, :rails)

# this will call the #gauge method on your custom bystander but not
# on the rails bystander, which does not have the method defined
blabber.gauge('my_app.some_key', my_args)

# if your bystander doesn't have a method defined (let's say error)
# then it will be skipped when calling that method
blabber.error('my_app.some_error', e) # will log the error to the rails logger, but not to your bystander

Available Bystanders

There are a number of core bystanders you can use to get started. The stdout bystander is built into blabbermouth, and a few other useful ones are provided by core extension gems.

Stdout

The :stdout bystander is built-in and provided with the core blabbermouth gem. It will format any messages sent to it and log them to standard output. In the future I'd like to provide a way to override the formatting of the logged messages (more easily than monkeypatching the Stdout#log_message method or extending to your own custom bystander and overriding that method).

Syslog

The :syslog bystander is provided by the blabbermouth-syslog gem and is similar to the stdout bystander, except it logs messages using the default configured Syslog::Logger.

Rails

The :rails bystander is provided by the blabbermouth-rails gem and is similar to the stdout bystander, except it logs messages using the default configured Rails.logger.

Rollbar

The :rollbar bystander is provided by the blabbermouth-rollbar gem. It logs your messages to Rollbar, which can be useful for logging errors and other info because it can be configured to pass along lots of additional data about requests, sessions, etc.

The rollbar gem is a dependency of blabbermouth-rollbar so you don't need to require it separately, but you will need to configure it and provide credentials the same way you would if you were using it directly.

Librato

The :librato bystander is provided by the blabbermouth-librato gem, and will ping Librato. Librato provides excellent tools to instrument various actions in your application, and it's a great way to track things like background jobs, execution time/performance in production environments, etc.

The librato-metrics gem is a dependency of blabbermouth-librato so you don't need to require it separately, but you will need to configure it and provide credentials the same way you would if you were using it directly.

New Relic

The :new_relic bystander is provided by the blabbermouth-new_relic gem, and will log your errors, messages and metrics with NewRelic using your application's configured NewRelic::Agent, which is provided by the newrelic_rpm gem.

Redis

Not Yet Implemented

Custom Bystanders

TODO document creating your own custom bystanders

Testing

Since any code that uses blabbermouth will blab to the configured bystanders, you might be seeing output or sending data to third party services when running tests (depending on your configuration). If you want to disable this, you can gag blabbermouth by setting the gagged configuration option in your test environment. For example:

Blabbermouth.configure do |config|
  config.gagged = Rails.env.test?
end

Contributing

  1. Fork it
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Add some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create new Pull Request