breadkit

Describe breadboard circuits in Ruby, YAML, or TOML. See how every connection fits together.

Breadkit resolves board holes, part pins, wires, and switch states into connected nets. It exports JSON IR for other tools and checks declared connection intent.

Circuit source · Explore its layers

Install with Ruby 3.3 or newer:

gem install breadkit

Save this as circuit.bk.rb:

title "Button and LED"
board :half

supply :USB, voltage: 5.0, plus: "B+1", minus: "B-1"
net :VCC, at: "B+1"
net :GND, at: "B-1"

button :SW1, at: "e10"
resistor :R1, "330", pins: %w[a12 a16]
led :D1, color: :red, anode: "b16", cathode: "b17"

wire "a10", "B+", color: :red
wire "a17", "B-", color: :black

breadkit nets circuit.bk.rb
breadkit ir circuit.bk.rb > circuit.json

This README follows main (0.2.0). If breadkit --version shows an older published release, use the source checkout for newer features. The same circuit is available in YAML and TOML.

The sensor demo combines an RP2040 module with an OLED, two SHT31 sensors, switches, and IR modules. Its layer: declarations group parts and wires in the interactive SVG. These lines are from the full example:

offboard :OLED, :ssd1306_oled, side: :right, at: "a7", address: "0x3C", layer: "2 I2C"
offboard :SHT31A, :sht31, side: :right, at: "a12", address: "0x44", unused: ["ALR"], layer: "2 I2C"
offboard :SHT31B, :sht31, side: :right, at: "a19", address: "0x45", unused: ["ALR"], layer: "2 I2C"

wire "j5", "T+5", color: "#E24B4A", layer: "1 Power"
wire "OLED.SDA", "g24", color: "#378ADD", route: :edge, layer: "2 I2C"

Run bundle exec ruby exe/breadkit nets examples/05_sensor_demo.bk.rb from a source checkout to inspect the full circuit. The optional 5 V emitter layer is an alternative: disconnect its 3.3 V feed before using it.

• User guide and circuit gallery
• DSL reference and component catalog
• CLI reference, YAML/TOML guide, and JSON IR
• Browser Playground and editor integration
• MCP server, Rake task, jumper kit, and definition lockfile

The companion repositories are breadkit-render for diagrams, breadkit-lint for circuit checks, breadkit-rspec for connection matchers, and breadkit-parts for model-specific definitions. Each gem is released independently.

Ruby DSL files execute code; load only files you trust. YAML, TOML, and JSON IR are parsed as data.

git clone https://github.com/breadkit/breadkit.git
cd breadkit
bundle install
bundle exec ruby exe/breadkit nets examples/01_led_button.bk.rb
bundle exec rake

Clone companion repositories beside this checkout when working on their main branches. See the compatibility policy before changing a public data format.

MIT.