Project

crubyflie

0.01
No commit activity in last 3 years
No release in over 3 years
Client library to control a Crazyflie. This library allows to talk to a crazyflie using the USB radio dongle.
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies

Development

~> 1.3
>= 0
>= 0
>= 0

Runtime

 Project Readme

Crubyflie - A Ruby client for Crazyflie

Gem Version Build Status Coverage Status

Crubyflie is a Ruby rewrite of the Crazyflie 1.0 quadcopter Python client libraries, with some customizations.

The Crazyflie is awesome, but I did not know where to start contributing. Therefore I thought that rewriting the code in Ruby would be one way of knowing what is going on and how it works. Along the way I took the time to document all the code so that others can understand it.

You may be also interested in some other unofficial Crazyflie clients:

Features

  • Crubyflie can be used to fly a Crazyflie device using a Joystick and the Crazyradio USB dongle
  • Crubyflie exposes an API that allows to control the copter, read logging, parameters and console easily
  • Crubyflie runs headless
  • Lightweight: If you just want to fly, Crubyflie consumes around 1/2 memory and 1/3 CPU compared to the original Python cfheadless utility.
  • Hovering mode (see requirements below)

Requirements

Crubyflie versions >= 0.2.0 support hovering mode and are compatible with the latest firmware of Crazyradio (Version 0.53) and Crazyflie (Version 2015.1)

Old versions should probably work, otherwise you can try with the 0.1.3 gem version.

Installation

Crubyflie depends on rubysdl, for which you will need the SDL library and headers. Make sure you install libsdl-dev (Debian/Ubuntu), libSDL-devel (Opensuse) or whatever your distro calls it. Then:

gem install crubyflie

That's all.

Flying the Crazyflie

The easiest way to do it is to gem install crubyflie and then run the crubyflie command. This will connect to the first visible quadcopter using the first available joystick on your computer (you can modify this parameters with the appropiate flags):

> crubyflie -h
Options:
  -j, --joystick-id=<i>       Joystick ID (default: 0)
  -f, --cf-uri=<s>            Crazyflie URI (defaults to first one found in scan)
  -c, --config=<s>            Joystick configuration, defaults to default cfg in configs/ (default: /path/to/joystick_default.yaml)
  -r, --packet-retries=<i>    Number of retries when copter fails to ack a packet (-1 == forever) (default: 100)
  -d, --debug                 Enable debug messages
  -h, --help                  Show this message

There is a template/default configuration file with instructions (similar to PS3 standard assignments from the official app). You should modify this file to fit it to your needs (configuration parameters are well explained). The most tricky parameter in axis is the :max_change_rate. Depending on your controller, you will find the input is excessively throotled or not. I recommend that you play with this value.

If you are wondering about your Joystick's axis IDs, ranges etc, you will find a sdl-joystick-axis.rb script under tools that lets you open a joystick and check what the SDL library can read from it. It might come handy.

If you need help just open an issue or contact me.

Raspberry Pi

If you want to use Crubyflie in your Raspberry Pi you need to:

sudo apt-get install ruby ruby-dev libsdl-dev
sudo gem install crubyflie

This should provide everything you need to run the crubyflie command. Of course you might need to put your user in the input group and modify udev rules as explained in the Crazyflie wiki.

Using the Crazyflie API

While both Python and Ruby APIs expose access to params, logging, console and commander facilities, Crubyflie does it in sligthly different way.

Crubyflie access to facilities is offered fully under the Crazyflie instance object, let's see it as code:

require 'crubyflie'
include Crubyflie

# Connect
@cf = Crazyflie.new()
@cf.open_link(@radio_uri)

# Interface to the logging facility
@cf.log.create_log_block(...)
@cf.log.start_logging(...) do |log_values|
  ...
end
@cf.log.stop_logging(...)
@cf.log.delete_log(...)


# Interface to the param facility
@cf.param.get_value('param1.name') do |value|
  ...
end

@cf.param.get_value('param2.name') do |value|
  ...
end

@cf.param.set_value('param.name', 1)

# Interface to the commander facility
@cf.commander.send_setpoint(...)

# Interface to the console facility
@cf.console.read do |value|
  ...
end

That's pretty much all. As you see, instead of declaring callbacks, registering them etc. We let the user pass blocks, which are run when the data is available.

In Crubyflie, params are read and set synchronously, while the block passed to start_logging() will be called repeteadly and asynchrnously until stop_logging() is invoked. Console offers both synchronous read() and asynchronous start_reading() options.

There are some examples in the examples folder. Read the gem documentation to get full information of the parameters for each function call.

Contributing

Contributions are awesome! :) I'd love some help here, so be invited to open issues, send pull requests or give me your opinion.