EndState

EndState is an unobtrusive way to add state machines to your application.

An EndState::StateMachine acts as a decorator of sorts for your stateful object. Your stateful object does not need to know it is being used in a state machine and only needs to respond to state and state=. (This is customizable)

The control flow for guarding against transitions and performing post-transition operations is handled by classes you create allowing maximum separation of responsibilities.

Add this line to your application's Gemfile:

gem 'end_state'

And then execute:

$ bundle

Or install it yourself as:

$ gem install end_state

Create a state machine by subclassing EndState::StateMachine. Transitions can be named by adding an :as option.

class Machine < EndState::StateMachine
  transition parked: :idling, as: :start
  transition idling: :first_gear, first_gear: :second_gear, second_gear: :third_gear, as: :shift_up
  transition third_gear: :second_gear, second_gear: :first_gear, as: :shift_down
  transition first_gear: :idling, as: :idle
  transition [:idling, :first_gear] => :parked, as: :park
end

Use it by wrapping a stateful object.

class StatefulObject
  attr_accessor :state

  def initialize(state)
    @state = state
  end
end

machine = Machine.new(StatefulObject.new(:parked))

machine.transition :idling            # => true
machine.state                         # => :idling
machine.idling?                       # => true
machine.transition :first_gear        # => true
machine.transition :second_gear       # => true
machine.transition :third_gear        # => true
machine.state                         # => :third_gear
machine.can_transition? :first_gear   # => false
machine.can_transition? :second_gear  # => true
machine.transition :first_gear        # => false
machine.transition! :first_gear       # => raises InvalidTransition
machine.shift_down                    # => true
machine.shift_up                      # => true
machine.state                         # => :third_gear
machine.park                          # => false
machine.park!                         # => raises InvalidTransition

If you wrap an object that currently has nil as the state, the state will be set to :__nil__. You can change this using the set_initial_state method.

class Machine < EndState::StateMachine
  set_initial_state :first
end

You can specify the special state :any_state as the beginning of a transition. This will allow the machine to transition to the new state specified from any actual state.

class Machine < EndState::StateMachine
  transition parked: :idling
  transition idling: :first_gear
  transition any_state: :crashed
end

machine = Machine.new(StatefulObject.new(:parked))
machine.transition :crashed  # true
machine.state                # :crashed

machine = Machine.new(StatefulObject.new(:parked))
machine.transition :idling   # true
machine.transition :crashed  # true
machine.state                # :crashed

Guards can be created by subclassing EndState::Guard. Your class will be provided access to:

• object - The wrapped object.
• state - The desired state.
• params - A hash of params passed when calling transition on the machine.

Your class should implement the will_allow? method which must return true or false.

Optionally you can implement the passed and/or failed methods which will be called after the guard passes or fails. These will only be called during the check performed during the transition and will not be fired when asking can_transition?. These hooks can be useful for things like logging.

The wrapped object has an array failure_messages available for tracking reasons for invalid transitions. You may shovel a reason (string) into this if you want to provide information on why your guard failed. You can also use the helper method in the Guard class called add_error which takes a string.

The wrapped object has an array success_messages available for tracking reasons for valid transitions. You may shovel a reason (string) into this if you want to provide information on why your guard passed. You can also use the helper method in the Guard class called add_success which takes a string.

class EasyGuard < EndState::Guard
  def will_allow?
    true
  end

  def failed
    Rails.logger.error "Failed to transition to state #{state} from #{object.state}."
  end
end

A guard can be added to the transition definition:

class Machine < EndState::StateMachine
  transition a: :b do |t|
    t.guard EasyGuard
    t.guard SomeOtherGuard
  end
end

Concluders can be created by subclassing EndState::Concluder. Your class will be provided access to:

• object - The wrapped object that has been transitioned.
• state - The previous state.
• params - A hash of params passed when calling transition on the machine.

Your class should implement the call method which should return true or false as to whether it was successful or not.

If your concluder returns false, the transition will be "rolled back" and the failing transition, as well as all previous transitions will be rolled back. The roll back is performed by calling rollback on the concluder. During the roll back the concluder will be set up a little differently and you have access to:

• object - The wrapped object that has been rolled back.
• state - The attempted desired state.
• params - A hash of params passed when calling transition on the machine.

The wrapped object has an array failure_messages available for tracking reasons for invalid transitions. You may shovel a reason (string) into this if you want to provide information on why your concluder failed. You can also use the helper method in the Concluder class called add_error which takes a string.

The wrapped object has an array success_messages available for tracking reasons for valid transitions. You may shovel a reason (string) into this if you want to provide information on why your concluder succeeded. You can also use the helper method in the Concluder class called add_success which takes a string.

class WrapUp < EndState::Concluder
  def call
    # Some important processing
    true
  end

  def rollback
    # Undo stuff that shouldn't have been done.
  end
end

A concluder can be added to the transition definition:

class Machine < EndState::StateMachine
  transition a: :b do |t|
    t.concluder WrapUp
  end
end

Since it is a common use case, a concluder is included which will call save on the wrapped object if it responds to save. You can use this with a convience method in your transition definition:

class Machine < EndState::StateMachine
  transition a: :b do |t|
    t.persistence_on
  end
end

By default, a transition from one state to another is handled by EndState and only changes the state to the new state. This is the recommended default and you should have a good reason to do something more or different. If you really want to do something different though you can create a class that subclasses EndState::Action and implement the call method.

You will have access to:

• object - The wrapped object.
• state - The desired state.

class MyCustomAction < EndState::Action
  def call
    # Do something special
    super
  end
end

class Machine < EndState::StateMachine
  transition a: :b do |t|
    t.custom_action MyCustomAction
  end
end

By using the as option in a transition definition you are creating an event representing that transition. This can allow you to exercise the machine in a more natural "verb" style interaction. Events, like transition have both a standard and a bang (!) style. The bang style will raise an exception if there is a problem.

class Machine < EndState::StateMachine
  transition a: :b, as: :go
end

machine = Machine.new(StatefulObject.new(:a))

machine.go                  # => true
machine.state               # => :b
machine.go                  # => false
machine.go!                 # => raises InvalidTransition

When calling a transition, you can optionally provide a hash of parameters which will be available to the guards and concluders you include in the transition definition.

When defining a transition you can indicate what parameters you are expecting with allow_params and require_params. If you require any params then attempting to transition without them provided will raise an error. Specifying allowed params is purely for documentation purposes.

class Machine < EndState::StateMachine
  transition a: :b, as: :go do |t|
    t.allow_params :foo, :bar
  end
end

class Machine < EndState::StateMachine
  transition a: :b, as: :go do |t|
    t.require_params :foo, :bar
  end
end

machine = Machine.new(StatefulObject.new(:a))
machine.transition :b                         # => error raised: 'Missing params: foo, bar'
machine.transition :b, foo: 1, bar: 'value'   # => true

machine = Machine.new(StatefulObject.new(:a))
machine.go                        # => error raised: 'Missing params: foo, bar'
machine.go foo: 1, bar: 'value'   # => true

You may want to use an attribute other than state to track the state of the machine.

class Machine < EndState::StateMachine
  state_attribute :status
end

Depending on how you persist the state (if at all) you may want what is stored in state to be a string instead of a symbol. You can tell the machine this preference.

class Machine < EndState::StateMachine
  store_states_as_strings!
end

By default transition will only raise an error, EndState::UnknownState, if called with a state that doesn't exist. All other failures, such as missing transition, guard failure, or concluder failure will silently just return false and not transition to the new state.

You also have the option to use transition! which will instead raise an error for failures. If your guards and/or concluders add to the failure_messages array then they will be included in the error message.

Additionally, if you would like to treat all transitions as hard and raise an error you can set that in the machine definition.

class Machine < EndState::StateMachine
  treat_all_transitions_as_hard!
end

If you install GraphViz and the gem ruby-graphviz you can create images representing your state machines.

EndState::Graph.new(MyMachine).draw.output png: 'my_machine.png'

If you use events in your machine, it will add the events along the arrow representing the transition. If you don't want this, pass in false when contructing the Graph.

EndState::Graph.new(MyMachine, false).draw.output png: 'my_machine.png'

Included is a custom RSpec matcher for testing your machines.

In your spec_helper.rb add:

require 'end_state_matchers'

In the spec for your state machine:

describe Machine do
  specify { expect(Machine).to have_transition(a: :b).with_guard(MyGuard) }
  specify { expect(Machine).to have_transition(a: :b).with_concluder(MyConcluder) }
  specify { expect(Machine).to have_transition(a: :b).with_guard(MyGuard).with_concluder(MyConcluder) }
  specify { expect(Machine).to have_transition(a: :b).with_guards(MyGuard, AnotherGuard) }
  specify { expect(Machine).to have_transition(a: :b).with_concluders(MyConcluder, AnotherConcluder) }
  specify { expect(Machine).not_to have_transition(a: :c) }
end

1. Fork it ( https://github.com/Originate/end_state/fork )
2. Create your feature branch (git checkout -b my-new-feature)
3. Commit your changes (git commit -am 'Add some feature')
4. Push to the branch (git push origin my-new-feature)
5. Create new Pull Request