0.03
No commit activity in last 3 years
No release in over 3 years
Simple API for writing asynchronous EventMachine and AMQP specs. Runs legacy EM-Spec based examples. Supports RSpec and RSpec2.
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies

Development

~> 0.8.0.rc1
>= 1.0.0
~> 4.2.7
~> 2.5.0
>= 0
 Project Readme

About evented-spec

Evented-spec is a set of helpers to help you test your asynchronous code.

EventMachine/Cool.io-based code, including asynchronous AMQP library is notoriously difficult to test. To the point that many people recommend using either mocks or synchronous libraries instead of EM-based libraries in unit tests. This is not always an option, however — sometimes your code just has to run inside the event loop, and you want to test a real thing, not just mocks.

em-spec gem made it easier to write evented specs, but it had several drawbacks. First, it is not easy to manage both EM.run and AMQP.start loops at the same time. Second, AMQP is not properly stopped and deactivated upon exceptions and timeouts, resulting in state leak between examples and multiple mystereous failures. amqp-spec, and, subsequently, evented-spec add more helpers to keep your specs from being bloated.

Usage

To get started with evented-spec you need to include one of the helper modules in your example groups, e.g.:

describe "eventmachine-based client" do
  include EventedSpec::SpecHelper
  it "should allow you to start a reactor" do
    em do
      EventMachine.reactor_running?.should be_true
      done
    end
  end
  context "nested contexts" do
    it "don't require another include" do
      em do
        EventMachine.add_timer(0.1) { @timer_run = true }
        done(0.3)
      end
      @timer_run.should be_true
    end
  end
end

Particular modules and methods are explained below.

#done

We have no means to know when your work with reactor is finished, so whatever it is you need to call done at some point. It optionally accepts a timeout and a block that is executed right before event reactor loop is stopped. If you don’t call done, your specs are going to fail by timeout.

EventedSpec::SpecHelper

EventedSpec::SpecHelper is for semi-manual managing of reactor life-cycle. It includes three helpers: for EventMachine, Coolio and AMQP.

em stands for EventMachine. It takes a block, which is run after reactor starts.

amqp stands for AMQP. It takes a block, which is run after amqp connects with broker using given or default options.

coolio stands for cool.io. It takes a block, which is run after reactor starts.

All three accept a hash of options. Look into method documentation to learn more.

EventedSpec::EMSpec, EventedSpec::AMQPSpec, EventedSpec::CoolioSpec

EventedSpec::EMSpec wraps every example in em block, so it might save you a couple of lines per example. EventedSpec::AMQPSpec wraps every example in amqp block.

Also note that every example group including EMSpec or AMQPSpec automatically includes SpecHelper.

Example:

describe "eventmachine specs" do
  include EventedSpec::EMSpec
  it "should run in a reactor" do
    EventMachine.reactor_running?.should be_true
    done # don't forget to finish your specs properly!
  end
end

default_options, default_timeout

You can also pass some default options to specs (like amqp settings), they’re specific to domain you’re using evented-spec in.

default_timeout sets time (in seconds) for specs to time out

describe "using default_timeout" do
  include EventedSpec::SpecHelper
  default_timeout 0.5
  it "should prevent specs from hanging up" do
    em do
      1.should == 1 # this spec is going to fail with timeout error because #done is not called
    end
  end
end

Specific timeout

A specific timeout can be set as well

describe “overriding default_timeout” do
include EventedSpec::SpecHelper
default_timeout 0.5
it “should give it some more time” do
em(5) do
1.should == 1 # this spec is going to fail with timeout error after 5 seconds
end
end
end

Hooks

There are 6 hooks available to evented specs:

  • em_before — launches after reactor started, before example runs
  • em_after — launches right before reactor is stopped, after example runs
  • amqp_before — launches after amqp connects, before example runs
  • amqp_after — launches before amqp disconnects, after example runs
  • coolio_before — launches after Cool.io starts, before example runs
  • coolio_after — launches before Cool.io stops, after example runs

So, the order of hooks for an AMQP spec is as follows: before(:all), before(:each),
em_before, amqp_before, example, amqp_after, em_after, after(:each),
after(:all)

describe "using amqp hooks" do
  include EventedSpec::AMQPSpec
  default_timeout 0.5
  amqp_before do
    AMQP.connection.should_not be_nil
  end
  let(:data) { "Test string" }
  it "should do something useful" do
    AMQP::Channel.new do |channel, _|
      exchange = channel.direct("amqp-test-exchange")
      queue = channel.queue("amqp-test-queue").bind(exchange)
      queue.subscribe do |hdr, msg|
        hdr.should be_an AMQP::Header
        msg.should == data
        done { queue.unsubscribe; queue.delete }
      end
      EM.add_timer(0.2) do
        exchange.publish data
      end
    end
  end
end

Words of warning on blocking the reactor

Evented specs are currently run inside of reactor thread. What this effectively means is that you should not block during spec execution.

For example, the following will not work:

describe "using amqp" do
  include EventedSpec::AMQPSpec
  it "should do something useful" do
    channel = AMQP::Channel.new
    sleep 0.2                     # voila, you're blocking the reactor
    channel.should be_open        # no, it should not
    done
  end
end

What you should do instead is use callbacks:

describe "using amqp" do
  include EventedSpec::AMQPSpec
  it "should do something useful" do
    AMQP::Channel.new do |channel, _|
      channel.should be_open
      done
    end
  end
end

You can also use #delayed helper method to maintain order of execution when callbacks are not an option.

describe "using amqp" do
  include EventedSpec::AMQPSpec
  it "should do something useful" do
    channel = AMQP::Channel.new
    @stage = 0
    delayed(0.2) {
      channel.should be_open
      @stage = 1
    }
    delayed(0.3) {
      @stage.should == 1
      done
    }
    delayed(0.4) {
      # this block is never going to be executed
      raise "Help me!"
    }
  end
end

I have an existing reactor running in separate thread, amqp specs won’t work for me what should I do?

Unfortunately, right now there aren’t many remedies to your problem, besides stopping the event loop in before(:all) hook like this:

describe "Example" do
  before(:all) { EM.stop_event_loop; sleep(0.1) }
  after(:all) { do_something_to_restart_the_eventmachine }
  include EventedSpec::SpecHelper
  it "should do something" do
    em { done }
  end
end

Reason is simple: if we don’t restart event loop every spec example, all kinds of state leaks may occur: stale timers, delayed exceptions, weirdest errors and even segfaults. It isn’t impossible but it certainly is very invasive.

Compatibility

EventedSpec is tested with RSpec >= 2.5.0 / Minitest >= 2.11.2, Cool.io ~> 1.0.0, EventMachine >= 0.12.10, and AMQP >= 0.8.0. Running it with RSpec 1.3 and/or AMQP 0.7.0 is not unheard of, although not tested in all its entirety.

See also

You can see evented-spec in use in spec suites for our amqp gems, amq-client and amqp.

Links