Project

faulty

0.02
The project is in a healthy, maintained state
Fault-tolerance tools for ruby based on circuit-breakers
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
 Project Readme

Faulty

Gem Version Build Status Code Climate Test Coverage Inline docs

Fault-tolerance tools for ruby based on circuit-breakers.

users = Faulty.circuit(:api).try_run do
  api.users
end.or_default([])

Installation

Add it to your Gemfile:

gem 'faulty'

Or install it manually:

gem install faulty

During your app startup, call Faulty.init. For Rails, you would do this in config/initializers/faulty.rb. See Setup for details.

API Docs

API docs can be read on rubydoc.info, inline in the source code, or you can generate them yourself with Ruby yard:

bin/yardoc

Then open doc/index.html in your browser.

Setup

Use the default configuration options:

Faulty.init

Or specify your own configuration:

Faulty.init do |config|
  config.storage = Faulty::Storage::Redis.new

  config.listeners << Faulty::Events::CallbackListener.new do |events|
    events.circuit_open do |payload|
      puts 'Circuit was opened'
    end
  end
end

For a full list of configuration options, see the Global Configuration section.

What is this for?

Circuit breakers are a fault-tolerance tool for creating separation between your application and external dependencies. For example, your application may call an external API to send a text message:

TextApi.send(message)

In normal operation, this API call is very fast. However what if the texting service started hanging? Your application would quickly use up a lot of resources waiting for requests to return from the service. You could consider adding a timeout to your request:

TextApi.send(message, timeout: 5)

Now your application will terminate requests after 5 seconds, but that could still add up to a lot of resources if you call this thousands of times. Circuit breakers solve this problem.

Faulty.circuit(:text_api).run do
  TextApi.send(message, timeout: 5)
end

Now, when the text API hangs, the first few will run and start timing out. This will trip the circuit. After the circuit trips (see How it Works), calls to the text API will be paused for the configured cool down period. Your application resources are not overwhelmed.

You are free to implement a fallback or error handling however you wish, for example, in this case, you might add the text message to a failure queue:

Faulty.circuit(:text_api).run do
  TextApi.send(message, timeout: 5)
rescue Faulty::CircuitError => e
  FailureQueue.enqueue(message)
end

Basic Usage

To create a circuit, call Faulty.circuit. This can be done as you use the circuit, or you can set it up beforehand. Any options passed to the circuit method are synchronized across threads and saved as long as the process is alive.

circuit1 = Faulty.circuit(:api, cache_refreshes_after: 1800)

# The options from above are also used when called here
circuit2 = Faulty.circuit(:api)
circuit2.options.cache_refreshes_after == 1800 # => true

# The same circuit is returned on each consecutive call
circuit1.equal?(circuit2) # => true

To run a circuit, call the run method:

Faulty.circuit(:api).run do
  api.users
end

See How it Works for more details about how Faulty handles circuit failures.

If the run block above fails, a Faulty::CircuitError will be raised. It is up to your application to handle that error however necessary or crash. Often though, you don't want to crash your application when a circuit fails, but instead apply a fallback or default behavior. For this, Faulty provides the try_run method:

result = Faulty.circuit(:api).try_run do
  api.users
end

users = if result.ok?
  result.get
else
  []
end

The try_run method returns a result type instead of raising errors. See the API docs for Result for more information. Here we use it to check whether the result is ok? (not an error). If it is we set the users variable, otherwise we set a default of an empty array. This pattern is so common, that Result also implements a helper method or_default to do the same thing:

users = Faulty.circuit(:api).try_run do
  api.users
end.or_default([])

How it Works

Faulty implements a version of circuit breakers inspired by Martin Fowler's post on the subject. A few notable features of Faulty's implementation are:

  • Rate-based failure thresholds
  • Integrated caching inspired by Netflix's Hystrix with automatic cache jitter and error fallback.
  • Event-based monitoring

Following the principals of the circuit-breaker pattern, the block given to run or try_run will always be executed as long as it never raises an error. If the block does raise an error, then the circuit keeps track of the number of runs and the failure rate.

Once both thresholds are breached, the circuit is opened. Once open, the circuit starts the cool-down period. Any executions within that cool-down are skipped, and a Faulty::OpenCircuitError will be raised.

After the cool-down has elapsed, the circuit enters the half-open state. In this state, Faulty allows a single execution of the block as a test run. If the test run succeeds, the circuit is fully opened and the circuit state is reset. If the test run fails, the circuit is closed and the cool-down is reset.

Each time the circuit changes state or executes the block, events are raised that are sent to the Faulty event notifier. The notifier should be used to track circuit failure rates, open circuits, etc.

In addition to the classic circuit breaker design, Faulty implements caching that is integrated with the circuit state. See Caching for more detail.

Global Configuration

Faulty.init can set the following global configuration options. This example illustrates the default values. It is also possible to define multiple non-global configuration scopes (see Scopes).

Faulty.init do |config|
  # The cache backend to use. By default, Faulty looks for a Rails cache. If
  # that's not available, it uses an ActiveSupport::Cache::Memory instance.
  # Otherwise, it uses a Faulty::Cache::Null and caching is disabled.
  config.cache = Faulty::Cache::Default.new

  # The storage backend. By default, Faulty uses an in-memory store. For most
  # production applications, you'll want a more robust backend. Faulty also
  # provides Faulty::Storage::Redis for this.
  config.storage = Faulty::Storage::Memory.new

  # An array of event listeners. Each object in the array should implement
  # Faulty::Events::ListenerInterface. For ad-hoc custom listeners, Faulty
  # provides Faulty::Events::CallbackListener.
  config.listeners = [Faulty::Events::LogListener.new]

  # The event notifier. For most use-cases, you don't need to change this,
  # However, Faulty allows substituting your own notifier if necessary.
  # If overridden, config.listeners will be ignored.
  config.notifier = Faulty::Events::Notifier.new(config.listeners)
end

For all Faulty APIs that have configuration, you can also pass in an options hash. For example, Faulty.init could be called like this:

Faulty.init(cache: Faulty::Cache::Null.new)

Circuit Options

A circuit can be created with the following configuration options. Those options are only set once, synchronized across threads, and will persist in-memory until the process exits. If you're using scopes, the options are retained within the context of each scope. All options given after the first call to Faulty.circuit (or Scope.circuit) are ignored.

This is because the circuit objects themselves are internally memoized, and are read-only once created.

The following example represents the defaults for a new circuit:

Faulty.circuit(:api) do |config|
  # The cache backend for this circuit. Inherits the global cache by default.
  config.cache = Faulty.options.cache

  # The number of seconds before a cache entry is expired. After this time, the
  # cache entry may be fully deleted. If set to nil, the cache will not expire.
  config.cache_expires_in = 86400

  # The number of seconds before a cache entry should be refreshed. See the
  # Caching section for more detail. A value of nil disables cache refreshing.
  config.cache_refreshes_after = 900

  # The number of seconds to add or subtract from cache_refreshes_after
  # when determining whether a cache entry should be refreshed. Helps mitigate
  # the "thundering herd" effect
  config.cache_refresh_jitter = 0.2 * config.cache_refreshes_after

  # After a circuit is opened, the number of seconds to wait before moving the
  # circuit to half-open.
  config.cool_down = 300

  # The errors that will be captured by Faulty and used to trigger circuit
  # state changes.
  config.errors = [StandardError]

  # Errors that should be ignored by Faulty and not captured.
  config.exclude = []

  # The event notifier. Inherits the global notifier by default
  config.notifier = Faulty.options.notifier

  # The minimum failure rate required to trip a circuit
  config.rate_threshold = 0.5

  # The minimum number of runs required before a circuit can trip
  config.sample_threshold = 3

  # The storage backend for this circuit. Inherits the global storage by default
  config.storage = Faulty.options.storage
end

Following the same convention as Faulty.init, circuits can also be created with an options hash:

Faulty.circuit(:api, cache_expires_in: 1800)

Caching

Faulty integrates caching into it's circuits in a way that is particularly suited to fault-tolerance. To make use of caching, you must specify the cache configuration option when initializing Faulty or creating a scope. If you're using Rails, this is automatically set to the Rails cache.

Once your cache is configured, you can use the cache parameter when running a circuit to specify a cache key:

feed = Faulty.circuit(:rss_feeds)
  .try_run(cache: "rss_feeds/#{feed}") do
    fetch_feed(feed)
  end.or_default([])

By default a circuit has the following options:

  • cache_expires_in: 86400 (1 day). This is sent to the cache backend and defines how long the cache entry should be stored. After this time elapses, queries will result in a cache miss.
  • cache_refreshes_after: 900 (15 minutes). This is used internally by Faulty to indicate when a cache should be refreshed. It does not affect how long the cache entry is stored.
  • cache_refresh_jitter: 180 (3 minutes = 20% of cache_refreshes_after). The maximum number of seconds to randomly add or subtract from cache_refreshes_after when determining whether to refresh a cache entry. This mitigates the "thundering herd" effect caused by many processes simultaneously refreshing the cache.

This code will attempt to fetch an RSS feed protected by a circuit. If the feed is within the cache refresh period, then the result will be returned from the cache and the block will not be executed regardless of the circuit state.

If the cache is hit, but outside its refresh period, then Faulty will check the circuit state. If the circuit is closed or half-open, then it will run the block. If the block is successful, then it will update the circuit, write to the cache and return the new value.

However, if the cache is hit and the block fails, then that failure is noted in the circuit and Faulty returns the cached value.

If the circuit is open and the cache is hit, then Faulty will always return the cached value.

If the cache query results in a miss, then faulty operates as normal. In the code above, if the circuit is closed, the block will be executed. If the block succeeds, the cache is refreshed. If the block fails, the default of [] will be returned.

Fault Tolerance

Faulty backends are fault-tolerant by default. Any StandardErrors raised by the storage or cache backends are captured and suppressed. Failure events for these errors are sent to the notifier.

If the storage backend fails, all circuits will default to open. If the cache backend fails, all cache queries will miss.

Event Handling

Faulty uses an event-dispatching model to deliver notifications of internal events. The full list of events is available from Faulty::Events::EVENTS.

  • cache_failure - A cache backend raised an error. Payload: key, action, error
  • circuit_cache_hit - A circuit hit the cache. Payload: circuit, key
  • circuit_cache_miss - A circuit hit the cache. Payload: circuit, key
  • circuit_cache_write - A circuit wrote to the cache. Payload: circuit, key
  • circuit_closed - A circuit closed. Payload: circuit
  • circuit_failure - A circuit execution raised an error. Payload: circuit, status, error
  • circuit_opened - A circuit execution caused the circuit to open. Payload circuit, error
  • circuit_reopened - A circuit execution cause the circuit to reopen from half-open. Payload: circuit, error.
  • circuit_skipped - A circuit execution was skipped because the circuit is closed. Payload: circuit
  • circuit_success - A circuit execution was successful. Payload: circuit, status
  • storage_failure - A storage backend raised an error. Payload circuit (can be nil), action, error

By default events are logged using Faulty::Events::LogListener, but that can be replaced, or additional listeners can be added.

CallbackListener

The callback listener is useful for ad-hoc handling of events. You can specify an event handler by calling a method on the callback handler by the same name.

Faulty.init do |config|
  # Replace the default listener with a custom callback listener
  listener = Faulty::Events::CallbackListener.new do |events|
    events.circuit_opened do |payload|
      MyNotifier.alert("Circuit #{payload[:circuit].name} opened: #{payload[:error].message}")
    end
  end
  config.listeners = [listener]
end

Other Built-in Listeners

In addition to the log and callback listeners, Faulty intends to implement built-in service-specific handlers to make it easy to integrate with monitoring and reporting software.

  • Faulty::Events::HoneybadgerListener: Reports circuit and backend errors to the Honeybadger error reporting service.

Custom Listeners

You can implement your own listener by following the documentation in Faulty::Events::ListenerInterface. For example:

class MyFaultyListener
  def handle(event, payload)
    MyNotifier.alert(event, payload)
  end
end
Faulty.init do |config|
  config.listeners = [MyFaultyListener.new]
end

Configuring the Storage Backend

Memory

The Faulty::Cache::Memory backend is the default storage backend. The default configuration:

Faulty.init do |config|
  config.storage = Faulty::Storage::Memory.new do |storage|
    # The maximum number of circuit runs that will be stored
    storage.max_sample_size = 100
  end
end

Redis

The Faulty::Cache::Redis backend provides distributed circuit storage using Redis. The default configuration:

Faulty.init do |config|
  config.storage = Faulty::Storage::Redis.new do |storage|
    # The Redis client. Accepts either a Redis instance, or a ConnectionPool
    # of Redis instances.
    storage.client = ::Redis.new

    # The prefix to prepend to all redis keys used by Faulty circuits
    storage.key_prefix = 'faulty'

    # A string to separate the parts of the redis key
    storage.key_separator = ':'

    # The maximum number of circuit runs that will be stored
    storage.max_sample_size = 100

    # The maximum number of seconds that a circuit run will be stored
    storage.sample_ttl = 1800
  end
end

Listing Circuits

For monitoring or debugging, you may need to retrieve a list of all circuit names. This is possible with Faulty.list_circuits (or the equivalent method on your scope).

You can get a list of all circuit statuses by mapping those names to their status objects. Be careful though, since this could cause performance issues for very large numbers of circuits.

statuses = Faulty.list_circuits.map do |name|
  Faulty.circuit(name).status
end

Locking Circuits

It is possible to lock a circuit open or closed. A circuit that is locked open will never execute its block, and always raise an Faulty::OpenCircuitError. This is useful in cases where you need to manually disable a dependency entirely. If a cached value is available, that will be returned from the circuit until it expires, even outside its refresh period.

Faulty.circuit(:broken_api).lock_open!

A circuit that is locked closed will never trip. This is useful in cases where a circuit is continuously tripping incorrectly. If a cached value is available, it will have the same behavior as an unlocked circuit.

Faulty.circuit(:false_positive).lock_closed!

To remove a lock of either type:

Faulty.circuit(:fixed).unlock!

Locking or unlocking a circuit has no concurrency guarantees, so it's not recommended to lock or unlock circuits from production code. Instead, locks are intended as an emergency tool for troubleshooting and debugging.

Scopes

It is possible to have multiple configurations of Faulty running within the same process. The most common configuration is to simply use Faulty.init to configure Faulty globally, however it is possible to have additional configurations using scopes.

The default scope

When you call Faulty.init, you are actually creating the default scope. You can access this scope directly by calling Faulty.default.

# We create the default scope
Faulty.init

# Access the default scope
scope = Faulty.default

# Alternatively, access the scope by name
scope = Faulty[:default]

You can rename the default scope if desired:

Faulty.init(:custom_default)

scope = Faulty.default
scope = Faulty[:custom_default]

Multiple Scopes

If you want multiple scopes, but want global, thread-safe access to them, you can use Faulty.register:

api_scope = Faulty::Scope.new do |config|
  # This accepts the same options as Faulty.init
end

Faulty.register(:api, api_scope)

# Now access the scope globally
Faulty[:api]

When you call Faulty.circuit, that's the same as calling Faulty.default.circuit, so you can apply the same API to any other Faulty scope:

Faulty[:api].circuit(:api_circuit).run { 'ok' }

Standalone Scopes

If you choose, you can use Faulty scopes without registering them globally. This could be useful if you prefer dependency injection over global state.

faulty = Faulty::Scope.new
faulty.circuit(:standalone_circuit)

Calling circuit on the scope still has the same memoization behavior that Faulty.circuit has, so subsequent calls to the same circuit will return a memoized circuit object.

Implementing a Cache Backend

You can implement your own cache backend by following the documentation in Faulty::Cache::Interface. It is a fairly simple API, with only get/set methods. For example:

class MyFaultyCache
  def initialize(my_cache)
    @cache = my_cache
  end

  def read(key)
    @cache.read(key)
  end

  def write(key, value, expires_in: nil)
    @cache.write(key, value, expires_in)
  end

  # Set this to false unless your cache never raises errors
  def fault_tolerant?
    false
  end
end

Feel free to open a pull request if your cache backend would be useful for other users.

Implementing a Storage Backend

You can implement your own storage backend by following the documentation in Faulty::Storage::Interface. Since the storage has some tricky requirements regarding concurrency, the Faulty::Storage::Memory can be used as a reference implementation. Feel free to open a pull request if your storage backend would be useful for other users.

Alternatives

Faulty has its own opinions about how to implement a circuit breaker in Ruby, but there are and have been many other options:

Currently Active

  • semian: A resiliency toolkit that includes circuit breakers. It uses adapters to auto-wire circuits, and it has only host-local storage by design.
  • circuitbox: Similar in function to Faulty, but with a different API. It uses Moneta to abstract circuit storage to allow any key-value store.

Previous Work

Faulty's Unique Features

  • Simple API but configurable for advanced users
  • Pluggable storage backends (circuitbox also has this)
  • Global, or local configuration with scopes
  • Integrated caching support tailored for fault-tolerance
  • Manually lock circuits open or closed