Project

flash_flow

0.0
No commit activity in last 3 years
No release in over 3 years
Flash flow is a command line tool for keeping your acceptance environment up to date
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies
 Project Readme

Flash Flow

Flash Flow is a ruby gem that helps your team keep your acceptance environment up to date. Check out this gist for a detailed explanation of how it works.

Installation

Add this line to your application's Gemfile:

gem 'flash_flow'

And then run:

$ bundle install
$ bundle exec flash_flow --install

Or install it yourself as:

$ gem install flash_flow

And then run:

$ flash_flow --install

After "installing" flash_flow, you'll have a file "config/flash_flow.yml.erb". If your remote is origin, your master branch is master, and you're fine using "acceptance" as the branch that flash_flow owns, you are ready to go for flash_flow basic. If not, edit that file and change branch and remote names accordingly.

Usage

flash_flow is a ruby script which, in the simplest case, can just be run by calling flash_flow. What that will do (once your application is properly configured) is:

  1. Push your branch to the remote
  2. Reset your merge_branch to be the same as your master_branch
  3. Get your list of pull requests from github (or use the saved list, more on that later)
  4. Filter out any "removed" branches
  5. Merge the rest into the newly created merge_branch
  6. Push the merge_branch to the remote
  7. The merge_branch is now a merge of your master branch plus all of your pull requests.

Notes

  1. Step 1 will not push your branch if you're on either the merge_branch or master_branch, but it will still merge all the other branches and push the result.
  2. flash_flow creates a copy of your local git repo. The copy lives in /your/repo/dir/../.flash_flow/. That's where it merges all the code and pushes to the remote from. This "shadow" directory is used so that your local git repository is still available for your use while flash flow is running.

Configuring a lock

We use the "lock" configuration in flash_flow.yml. The lock ensures that no one else is running flash_flow while you are so that you don't inadvertently have your newly pushed branch overwritten. The way we lock you out is super janky, we open an issue on github when flash_flow starts and close it when flash_flow is done. To configure the lock you need to specify the class name, your github token, your github repo, and the issue_id that you want to open and close each time. The email alerts you get from github about this issue are annoying and should be ignored.

Configuring branches

We use github to track our branches that we want to merge, and there are a few things about that worth noting. In step 1 after your branch is pushed, a pull request into master_branch will be created on github. If you add the "do not merge" label to a pull request, it will be excluded from the merge_branch. This is extremely useful whenever one of your co-workers breaks the build, you can either run flash_flow --no-merge from their branch, or go directly to github and add the "do not merge" label and then re-run flash_flow from your branch.

To use github as your source of merge branches you have to configure it with the class name, github token and repo, your master branch name and both the unmergeable label and do not merge label, which must exist on github. The unmergeable label is added to a pull request that has a conflict that can't be resolved and is therefore excluded from the merge branch.

Configuring an issue tracker

We use Pivotal Tracker. When we have finished work for a story on a particular branch we run flash_flow --story <story_id>, which will transition all of those stories to "finished" if they were previously "started".

When code deploys to our review environment, our deploy script runs flash_flow --review-deploy, which transitions stories associated with merged branches from "finished" to "delivered". At the same time, for a branch that has been removed ("--no-merge"), if the story is "delivered" it will transition back to "finished". This means that the only buttons that have to be manually clicked in tracker are "Start" and "Accept/Reject".

In addition, as part of our production deploy script, we run flash_flow --prod-deploy, which takes all the stories that are newly in the master_branch and adds a comment "Deployed to production on 12/25/2015 at 11:11pm". Tracker doesn't support a real state for "In production", so for us this comment serves as that state.

Runtime options

-v, --version

Print the current version of flash flow and exit.

-n, --no-merge

Runs flash_flow, but excludes the branch that you're on from the merge branch. If the branch you're on has breaking tests, you may want to get it out of your merge_branch, and this will do that and ensure that the next times flash_flow is run by anyone else it will not be included. It will add the "do not merge" label to your github pull request if you're using that. Anytime you run flash_flow without this option, the branch you're running from will be included in the merge_branch even if it has previously been set to "do not merge".

--rerere-forget

If you've resolved a merge conflict the wrong way, run with this option on the problem branch. The remembered resolution will be deleted and you'll get to re-resolve your conflict.

--story <story_id>

Associates a story id with this branch. See "configuring an issue tracker" for why this can be useful.

--stories <story_id1,storyid2...>

Same as --story, but a comma-separated list so you can pass more than one story at a time.

-f, --force-push

Forces pushes your branch. All it does is add "-f" to the git push command, so you'd better make sure you know what you're doing if you use this. The merge_branch always gets force pushed at the end, this option has nothing to do with that.

--release-notes

Lists all the stories that have been deployed to production in the last hours. Only relevant if you run --prod-deploy when you deploy.

--config-file FILE_PATH

This tells flash_flow how to find the configuration file. If you just put the file in config/flash_flow.yml you will never need this option.

--prod-deploy

If you have Pivotal Tracker configured it will look at all stories associated with branches, and if that branch is deployed to master_branch it will add a comment to those stories that says "Deployed to production on MM/DD/YY at XX:XX". This is meant to be used right after every deploy to your production environment. The acceptance branch will not be re-built in this case.

--review-deploy

If you have Pivotal Tracker configured it will look at all stories associated with branches, and if that branch is deployed to acceptance_branch it will mark any finished stories as delivered. This is best used right after every deploy to your acceptance environment. The acceptance branch will not be re-built in this case.

--resolve

Launch a bash shell to save your conflict resolutions. If your branch didn't merge the last time you ran flash flow you'll run this command. This drops you into bash where you can save your resolved conflicts, then those resolutions will be remembered the next time you run flash flow.

--resolve-manual

Print instructions that will show you how to resolve your merge conflicts without using flash flow's version of the shell. If you don't use bash, or flash flow does odd things to your bash config, this is the way to go.

A note about merge conflicts

When we first started using flash_flow, if your branch had a merge conflict you were out of luck. You had to wait for the branch that you were conflicting with to be merged to master, merge master into your branch, and then try again to get your code into the merge branch.

Then we discovered git rerere, which is the coolest feature of git that almost no one seems to have heard of. Basically what rerere does is remember how you resolved conflicts and auto-apply those patches when it notices the same conflicts.

If your branch has a conflict with the merge_branch flash_flow will look for a rerere patch and apply that if it exists. If it doesn't, flash_flow will not merge your branch (but will continue merging all the others), and it will spit out instructions for how to make your branch merge successfully. Once you follow those instructions (which involve resolving the merge conflicts and saving the resolution), the next time you run flash_flow it will use that resolution and everything will be sunshine and ponies.

In addition, flash_flow takes all your patches and copies them into the merge_branch where they are saved. Every time flash_flow is run, those patches are first copied out of the merge_branch into your local rerere cache. The result of this is that every time flash_flow is run all previous resolutions are available so once you've merged your branch and flash_flow'ed it, it will merge successfully for everyone else too. rerere ftwftwftw.

Contributing

  1. Fork it ( https://github.com/flashfunders/flash_flow/fork )
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Add some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create a new Pull Request