A long-lived project that still receives updates
Object geocoding (by street or IP address), reverse geocoding (coordinates to street address), distance queries for ActiveRecord and Mongoid, result caching, and more. Designed for Rails but works with Sinatra and other Rack frameworks too.
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies

Runtime

>= 0.1.0
>= 3.0.0
 Project Readme

Geocoder

Complete geocoding solution for Ruby.

Gem Version Code Climate

Key features:

  • Forward and reverse geocoding.
  • IP address geocoding.
  • Connects to more than 40 APIs worldwide.
  • Performance-enhancing features like caching.
  • Integrates with ActiveRecord and Mongoid.
  • Basic geospatial queries: search within radius (or rectangle, or ring).

Compatibility:

  • Ruby versions: 2.1+, and JRuby.
  • Databases: MySQL, PostgreSQL, SQLite, and MongoDB.
  • Rails: 5.x, 6.x, and 7.x.
  • Works outside of Rails with the json (for MRI) or json_pure (for JRuby) gem.

Table of Contents

Basic Features:

  • Basic Search
  • Geocoding Objects
  • Geospatial Database Queries
  • Geocoding HTTP Requests
  • Geocoding Service ("Lookup") Configuration

Advanced Features:

  • Performance and Optimization
  • Advanced Model Configuration
  • Advanced Database Queries
  • Geospatial Calculations
  • Batch Geocoding
  • Testing
  • Error Handling
  • Command Line Interface

The Rest:

See Also:

Basic Search

In its simplest form, Geocoder takes an address and searches for its latitude/longitude coordinates:

results = Geocoder.search("Paris")
results.first.coordinates
# => [48.856614, 2.3522219]  # latitude and longitude

The reverse is possible too. Given coordinates, it finds an address:

results = Geocoder.search([48.856614, 2.3522219])
results.first.address
# => "Hôtel de Ville, 75004 Paris, France"

You can also look up the location of an IP address:

results = Geocoder.search("172.56.21.89")
results.first.coordinates
# => [30.267153, -97.7430608]
results.first.country
# => "United States"

The success and accuracy of geocoding depends entirely on the API being used to do these lookups. Most queries work fairly well with the default configuration, but every application has different needs and every API has its particular strengths and weaknesses. If you need better coverage for your application you'll want to get familiar with the large number of supported APIs, listed in the API Guide.

Geocoding Objects

To automatically geocode your objects:

1. Your model must provide a method that returns an address to geocode. This can be a single attribute, but it can also be a method that returns a string assembled from different attributes (eg: city, state, and country). For example, if your model has street, city, state, and country attributes you might do something like this:

def address
  [street, city, state, country].compact.join(', ')
end

2. Your model must have a way to store latitude/longitude coordinates. With ActiveRecord, add two attributes/columns (of type float or decimal) called latitude and longitude. For MongoDB, use a single field (of type Array) called coordinates (i.e., field :coordinates, type: Array). (See Advanced Model Configuration for using different attribute names.)

3. In your model, tell geocoder where to find the object's address:

geocoded_by :address

This adds a geocode method which you can invoke via callback:

after_validation :geocode

Reverse geocoding (given lat/lon coordinates, find an address) is similar:

reverse_geocoded_by :latitude, :longitude
after_validation :reverse_geocode

With any geocoded objects, you can do the following:

obj.distance_to([43.9,-98.6])  # distance from obj to point
obj.bearing_to([43.9,-98.6])   # bearing from obj to point
obj.bearing_from(obj2)         # bearing from obj2 to obj

The bearing_from/to methods take a single argument which can be: a [lat,lon] array, a geocoded object, or a geocodable address (string). The distance_from/to methods also take a units argument (:mi, :km, or :nm for nautical miles). See Distance and Bearing below for more info.

One More Thing for MongoDB!

Before you can call geocoded_by you'll need to include the necessary module using one of the following:

include Geocoder::Model::Mongoid
include Geocoder::Model::MongoMapper

Latitude/Longitude Order in MongoDB

Everywhere coordinates are passed to methods as two-element arrays, Geocoder expects them to be in the order: [lat, lon]. However, as per the GeoJSON spec, MongoDB requires that coordinates be stored longitude-first ([lon, lat]), so internally they are stored "backwards." Geocoder's methods attempt to hide this, so calling obj.to_coordinates (a method added to the object by Geocoder via geocoded_by) returns coordinates in the conventional order:

obj.to_coordinates  # => [37.7941013, -122.3951096] # [lat, lon]

whereas calling the object's coordinates attribute directly (obj.coordinates by default) returns the internal representation which is probably the reverse of what you want:

obj.coordinates     # => [-122.3951096, 37.7941013] # [lon, lat]

So, be careful.

Use Outside of Rails

To use Geocoder with ActiveRecord and a framework other than Rails (like Sinatra or Padrino), you will need to add this in your model before calling Geocoder methods:

extend Geocoder::Model::ActiveRecord

Geospatial Database Queries

For ActiveRecord models:

To find objects by location, use the following scopes:

Venue.near('Omaha, NE, US')                   # venues within 20 miles of Omaha
Venue.near([40.71, -100.23], 50)              # venues within 50 miles of a point
Venue.near([40.71, -100.23], 50, units: :km)  # venues within 50 kilometres of a point
Venue.geocoded                                # venues with coordinates
Venue.not_geocoded                            # venues without coordinates

With geocoded objects you can do things like this:

if obj.geocoded?
  obj.nearbys(30)                       # other objects within 30 miles
  obj.distance_from([40.714,-100.234])  # distance from arbitrary point to object
  obj.bearing_to("Paris, France")       # direction from object to arbitrary point
end

For MongoDB-backed models:

Please do not use Geocoder's near method. Instead use MongoDB's built-in geospatial query language, which is faster. Mongoid also provides a DSL for geospatial queries.

Geocoding HTTP Requests

Geocoder adds location and safe_location methods to the standard Rack::Request object so you can easily look up the location of any HTTP request by IP address. For example, in a Rails controller or a Sinatra app:

# returns Geocoder::Result object
result = request.location

The location method is vulnerable to trivial IP address spoofing via HTTP headers. If that's a problem for your application, use safe_location instead, but be aware that safe_location will not try to trace a request's originating IP through proxy headers; you will instead get the location of the last proxy the request passed through, if any (excepting any proxies you have explicitly whitelisted in your Rack config).

Note that these methods will usually return nil in test and development environments because things like "localhost" and "0.0.0.0" are not geocodable IP addresses.

Geocoding Service ("Lookup") Configuration

Geocoder supports a variety of street and IP address geocoding services. The default lookups are :nominatim for street addresses and :ipinfo_io for IP addresses. Please see the API Guide for details on specific geocoding services (not all settings are supported by all services).

To create a Rails initializer with sample configuration:

rails generate geocoder:config

Some common options are:

# config/initializers/geocoder.rb
Geocoder.configure(
  # street address geocoding service (default :nominatim)
  lookup: :yandex,

  # IP address geocoding service (default :ipinfo_io)
  ip_lookup: :maxmind,

  # to use an API key:
  api_key: "...",

  # geocoding service request timeout, in seconds (default 3):
  timeout: 5,

  # set default units to kilometers:
  units: :km,

  # caching (see Caching section below for details):
  cache: Redis.new,
  cache_options: {
    expiration: 1.day, # Defaults to `nil`
    prefix: "another_key:" # Defaults to `geocoder:`
  }
)

Please see lib/geocoder/configuration.rb for a complete list of configuration options. Additionally, some lookups have their own special configuration options which are directly supported by Geocoder. For example, to specify a value for Google's bounds parameter:

# with Google:
Geocoder.search("Middletown", bounds: [[40.6,-77.9], [39.9,-75.9]])

Please see the source code for each lookup to learn about directly supported parameters. Parameters which are not directly supported can be specified using the :params option, which appends options to the query string of the geocoding request. For example:

# Nominatim's `countrycodes` parameter:
Geocoder.search("Rome", params: {countrycodes: "us,ca"})

# Google's `region` parameter:
Geocoder.search("Rome", params: {region: "..."})

Configuring Multiple Services

You can configure multiple geocoding services at once by using the service's name as a key for a sub-configuration hash, like this:

Geocoder.configure(

  timeout: 2,
  cache: Redis.new,

  yandex: {
    api_key: "...",
    timeout: 5
  },

  baidu: {
    api_key: "..."
  },

  maxmind: {
    api_key: "...",
    service: :omni
  }

)

Lookup-specific settings override global settings so, in this example, the timeout for all lookups is 2 seconds, except for Yandex which is 5.

Performance and Optimization

Database Indices

In MySQL and Postgres, queries use a bounding box to limit the number of points over which a more precise distance calculation needs to be done. To take advantage of this optimisation, you need to add a composite index on latitude and longitude. In your Rails migration:

add_index :table, [:latitude, :longitude]

In MongoDB, by default, the methods geocoded_by and reverse_geocoded_by create a geospatial index. You can avoid index creation with the :skip_index option, for example:

include Geocoder::Model::Mongoid
geocoded_by :address, skip_index: true

Avoiding Unnecessary API Requests

Geocoding only needs to be performed under certain conditions. To avoid unnecessary work (and quota usage) you will probably want to geocode an object only when:

  • an address is present
  • the address has been changed since last save (or it has never been saved)

The exact code will vary depending on the method you use for your geocodable string, but it would be something like this:

after_validation :geocode, if: ->(obj){ obj.address.present? and obj.address_changed? }

Caching

When relying on any external service, it's always a good idea to cache retrieved data. When implemented correctly, it improves your app's response time and stability. It's easy to cache geocoding results with Geocoder -- just configure a cache store:

Geocoder.configure(cache: Redis.new)

This example uses Redis, but the cache store can be any object that supports these methods:

  • store#[](key) or #get or #read - retrieves a value
  • store#[]=(key, value) or #set or #write - stores a value
  • store#del(url) - deletes a value
  • store#keys - (Optional) Returns array of keys. Used if you wish to expire the entire cache (see below).

Even a plain Ruby hash will work, though it's not a great choice (cleared out when app is restarted, not shared between app instances, etc).

When using Rails use the Generic cache store as an adapter around Rails.cache:

Geocoder.configure(cache: Geocoder::CacheStore::Generic.new(Rails.cache, {}))

You can also set a custom prefix to be used for cache keys:

Geocoder.configure(cache_options: { prefix: "..." })

By default the prefix is geocoder:

If you need to expire cached content:

Geocoder::Lookup.get(Geocoder.config[:lookup]).cache.expire(:all)  # expire cached results for current Lookup
Geocoder::Lookup.get(:nominatim).cache.expire("http://...")        # expire cached result for a specific URL
Geocoder::Lookup.get(:nominatim).cache.expire(:all)                # expire cached results for Nominatim
# expire all cached results for all Lookups.
# Be aware that this methods spawns a new Lookup object for each Service
Geocoder::Lookup.all_services.each{|service| Geocoder::Lookup.get(service).cache.expire(:all)}

Do not include the prefix when passing a URL to be expired. Expiring :all will only expire keys with the configured prefix -- it will not expire every entry in your key/value store.

In addition to conventional cache stores like Redis, it's possible to keep your cache in the database using ActiveRecord. For example see this gist.

Before you implement caching in your app please be sure that doing so does not violate the Terms of Service for your geocoding service.

Not all services support caching, check the service limitations in the API guide for more information.

Advanced Model Configuration

You are not stuck with the latitude and longitude database column names (with ActiveRecord) or the coordinates array (Mongo) for storing coordinates. For example:

geocoded_by :address, latitude: :lat, longitude: :lon  # ActiveRecord
geocoded_by :address, coordinates: :coords             # MongoDB

For reverse geocoding, you can specify the attribute where the address will be stored. For example:

reverse_geocoded_by :latitude, :longitude, address: :loc    # ActiveRecord
reverse_geocoded_by :coordinates, address: :street_address  # MongoDB

To specify geocoding parameters in your model:

geocoded_by :address, params: {region: "..."}

Supported parameters: :lookup, :ip_lookup, :language, and :params. You can specify an anonymous function if you want to set these on a per-request basis. For example, to use different lookups for objects in different regions:

geocoded_by :address, lookup: lambda{ |obj| obj.geocoder_lookup }

def geocoder_lookup
  if country_code == "RU"
    :yandex
  elsif country_code == "CN"
    :baidu
  else
    :nominatim
  end
end

Custom Result Handling

So far we have seen examples where geocoding results are assigned automatically to predefined object attributes. However, you can skip the auto-assignment by providing a block which handles the parsed geocoding results any way you like, for example:

reverse_geocoded_by :latitude, :longitude do |obj,results|
  if geo = results.first
    obj.city    = geo.city
    obj.zipcode = geo.postal_code
    obj.country = geo.country_code
  end
end

after_validation :reverse_geocode

Every Geocoder::Result object, result, provides the following data:

  • result.latitude - float
  • result.longitude - float
  • result.coordinates - array of the above two in the form of [lat,lon]
  • result.address - string
  • result.city - string
  • result.state - string
  • result.state_code - string
  • result.postal_code - string
  • result.country - string
  • result.country_code - string

Most APIs return other data in addition to these globally-supported attributes. To directly access the full response, call the #data method of any Geocoder::Result object. See the API Guide for links to documentation for all geocoding services.

Forward and Reverse Geocoding in the Same Model

You can apply both forward and reverse geocoding to the same model (i.e. users can supply an address or coordinates and Geocoder fills in whatever's missing) but you'll need to provide two different address methods:

  • one for storing the fetched address (when reverse geocoding)
  • one for providing an address to use when fetching coordinates (forward geocoding)

For example:

class Venue
  # build an address from street, city, and state attributes
  geocoded_by :address_from_components

  # store the fetched address in the full_address attribute
  reverse_geocoded_by :latitude, :longitude, address: :full_address
end

The same goes for latitude/longitude. However, for purposes of querying the database, there can be only one authoritative set of latitude/longitude attributes for use in database queries. This is whichever you specify last. For example, here the attributes without the fetched_ prefix will be authoritative:

class Venue
  geocoded_by :address,
    latitude: :fetched_latitude,
    longitude: :fetched_longitude
  reverse_geocoded_by :latitude, :longitude
end

Advanced Database Queries

The following apply to ActiveRecord only. For MongoDB, please use the built-in geospatial features.

The default near search looks for objects within a circle. To search within a doughnut or ring use the :min_radius option:

Venue.near("Austin, TX", 200, min_radius: 40)

To search within a rectangle (note that results will not include distance and bearing attributes):

sw_corner = [40.71, 100.23]
ne_corner = [36.12, 88.65]
Venue.within_bounding_box(sw_corner, ne_corner)

To search for objects near a certain point where each object has a different distance requirement (which is defined in the database), you can pass a column name for the radius:

Venue.near([40.71, 99.23], :effective_radius)

If you store multiple sets of coordinates for each object, you can specify latitude and longitude columns to use for a search:

Venue.near("Paris", 50, latitude: :secondary_latitude, longitude: :secondary_longitude)

Distance and Bearing

When you run a geospatial query, the returned objects have two attributes added:

  • obj.distance - number of miles from the search point to this object
  • obj.bearing - direction from the search point to this object

Results are automatically sorted by distance from the search point, closest to farthest. Bearing is given as a number of degrees clockwise from due north, for example:

  • 0 - due north
  • 180 - due south
  • 90 - due east
  • 270 - due west
  • 230.1 - southwest
  • 359.9 - almost due north

You can convert these to compass point names via provided method:

Geocoder::Calculations.compass_point(355) # => "N"
Geocoder::Calculations.compass_point(45)  # => "NE"
Geocoder::Calculations.compass_point(208) # => "SW"

Note: when running queries on SQLite, distance and bearing are provided for consistency only. They are not very accurate.

For more advanced geospatial querying, please see the rgeo gem.

Geospatial Calculations

The Geocoder::Calculations module contains some useful methods:

# find the distance between two arbitrary points
Geocoder::Calculations.distance_between([47.858205,2.294359], [40.748433,-73.985655])
 => 3619.77359999382 # in configured units (default miles)

# find the geographic center (aka center of gravity) of objects or points
Geocoder::Calculations.geographic_center([city1, city2, [40.22,-73.99], city4])
 => [35.14968, -90.048929]

See the code for more!

Batch Geocoding

If you have just added geocoding to an existing application with a lot of objects, you can use this Rake task to geocode them all:

rake geocode:all CLASS=YourModel

If you need reverse geocoding instead, call the task with REVERSE=true:

rake geocode:all CLASS=YourModel REVERSE=true

In either case, it won't try to geocode objects that are already geocoded. The task will print warnings if you exceed the rate limit for your geocoding service. Some services enforce a per-second limit in addition to a per-day limit. To avoid exceeding the per-second limit, you can add a SLEEP option to pause between requests for a given amount of time. You can also load objects in batches to save memory, for example:

rake geocode:all CLASS=YourModel SLEEP=0.25 BATCH=100

To avoid exceeding per-day limits you can add a LIMIT option. However, this will ignore the BATCH value, if provided.

rake geocode:all CLASS=YourModel LIMIT=1000

Testing

When writing tests for an app that uses Geocoder it may be useful to avoid network calls and have Geocoder return consistent, configurable results. To do this, configure the :test lookup and/or :ip_lookup

Geocoder.configure(lookup: :test, ip_lookup: :test)

Add stubs to define the results that will be returned:

Geocoder::Lookup::Test.add_stub(
  "New York, NY", [
    {
      'coordinates'  => [40.7143528, -74.0059731],
      'address'      => 'New York, NY, USA',
      'state'        => 'New York',
      'state_code'   => 'NY',
      'country'      => 'United States',
      'country_code' => 'US'
    }
  ]
)

With the above stub defined, any query for "New York, NY" will return the results array that follows. You can also set a default stub, to be returned when no other stub matches a given query:

Geocoder::Lookup::Test.set_default_stub(
  [
    {
      'coordinates'  => [40.7143528, -74.0059731],
      'address'      => 'New York, NY, USA',
      'state'        => 'New York',
      'state_code'   => 'NY',
      'country'      => 'United States',
      'country_code' => 'US'
    }
  ]
)

You may also delete a single stub, or reset all stubs including the default stub:

Geocoder::Lookup::Test.delete_stub('New York, NY')
Geocoder::Lookup::Test.reset

Notes:

  • Keys must be strings (not symbols) when calling add_stub or set_default_stub. For example 'country' => not :country =>.
  • The stubbed result objects returned by the Test lookup do not support all the methods real result objects do. If you need to test interaction with real results it may be better to use an external stubbing tool and something like WebMock or VCR to prevent network calls.

Error Handling

By default Geocoder will rescue any exceptions raised by calls to a geocoding service and return an empty array. You can override this on a per-exception basis, and also have Geocoder raise its own exceptions for certain events (eg: API quota exceeded) by using the :always_raise option:

Geocoder.configure(always_raise: [SocketError, Timeout::Error])

You can also do this to raise all exceptions:

Geocoder.configure(always_raise: :all)

The raise-able exceptions are:

SocketError
Timeout::Error
Geocoder::OverQueryLimitError
Geocoder::RequestDenied
Geocoder::InvalidRequest
Geocoder::InvalidApiKey
Geocoder::ServiceUnavailable

Note that only a few of the above exceptions are raised by any given lookup, so there's no guarantee if you configure Geocoder to raise ServiceUnavailable that it will actually be raised under those conditions (because most APIs don't return 503 when they should; you may get a Timeout::Error instead). Please see the source code for your particular lookup for details.

Command Line Interface

When you install the Geocoder gem it adds a geocode command to your shell. You can search for a street address, IP address, postal code, coordinates, etc just like you can with the Geocoder.search method for example:

$ geocode 29.951,-90.081
Latitude:         29.952211
Longitude:        -90.080563
Full address:     1500 Sugar Bowl Dr, New Orleans, LA 70112, USA
City:             New Orleans
State/province:   Louisiana
Postal code:      70112
Country:          United States
Map:              http://maps.google.com/maps?q=29.952211,-90.080563

There are also a number of options for setting the geocoding API, key, and language, viewing the raw JSON response, and more. Please run geocode -h for details.

Technical Discussions

Distance Queries in SQLite

SQLite's lack of trigonometric functions requires an alternate implementation of the near scope. When using SQLite, Geocoder will automatically use a less accurate algorithm for finding objects near a given point. Results of this algorithm should not be trusted too much as it will return objects that are outside the given radius, along with inaccurate distance and bearing calculations.

There are few options for finding objects near a given point in SQLite without installing extensions:

  1. Use a square instead of a circle for finding nearby points. For example, if you want to find points near 40.71, 100.23, search for objects with latitude between 39.71 and 41.71 and longitude between 99.23 and 101.23. One degree of latitude or longitude is at most 69 miles so divide your radius (in miles) by 69.0 to get the amount to add and subtract from your center coordinates to get the upper and lower bounds. The results will not be very accurate (you'll get points outside the desired radius), but you will get all the points within the required radius.

  2. Load all objects into memory and compute distances between them using the Geocoder::Calculations.distance_between method. This will produce accurate results but will be very slow (and use a lot of memory) if you have a lot of objects in your database.

  3. If you have a large number of objects (so you can't use approach #2) and you need accurate results (better than approach #1 will give), you can use a combination of the two. Get all the objects within a square around your center point, and then eliminate the ones that are too far away using Geocoder::Calculations.distance_between.

Because Geocoder needs to provide this functionality as a scope, we must go with option #1, but feel free to implement #2 or #3 if you need more accuracy.

Numeric Data Types and Precision

Geocoder works with any numeric data type (e.g. float, double, decimal) on which trig (and other mathematical) functions can be performed.

A summary of the relationship between geographic precision and the number of decimal places in latitude and longitude degree values is available on Wikipedia. As an example: at the equator, latitude/longitude values with 4 decimal places give about 11 metres precision, whereas 5 decimal places gives roughly 1 metre precision.

Troubleshooting

Mongoid

If you get one of these errors:

uninitialized constant Geocoder::Model::Mongoid
uninitialized constant Geocoder::Model::Mongoid::Mongo

you should check your Gemfile to make sure the Mongoid gem is listed before Geocoder. If Mongoid isn't loaded when Geocoder is initialized, Geocoder will not load support for Mongoid.

ActiveRecord

A lot of debugging time can be saved by understanding how Geocoder works with ActiveRecord. When you use the near scope or the nearbys method of a geocoded object, Geocoder creates an ActiveModel::Relation object which adds some attributes (eg: distance, bearing) to the SELECT clause. It also adds a condition to the WHERE clause to check that distance is within the given radius. Because the SELECT clause is modified, anything else that modifies the SELECT clause may produce strange results, for example:

If you get an error in the above cases, try the following:

# Use the :select option with the near scope to get the columns you want.
# Instead of City.near(...).select(:id, :name), try:
City.near("Omaha, NE", 20, select: "id, name")

# Pass a :select option to the near scope to get the columns you want.
# Then, Ruby's built-in pluck method gets arrays you want.
# Instead of City.near(...).pluck(:id) or City.near(...).ids,, try:
City.near("Omaha, NE", 20, select: "id, name").to_a.pluck(:id, :name)
City.near("Omaha, NE", 20, select: "id").to_a.pluck(:id)

# Pass a :select option to the near scope to get the columns you want.
# Instead of City.near(...).includes(:venues), try:
City.near("Omaha, NE", 20, select: "cities.*, venues.*").joins(:venues)

# This preload call will normally trigger two queries regardless of the
# number of results; one query on hotels, and one query on administrators.
# Instead of Hotel.near(...).includes(:administrator), try:
Hotel.near("London, UK", 50).joins(:administrator).preload(:administrator)

Geocoding is Slow

With most lookups, addresses are translated into coordinates via an API that must be accessed through the Internet. These requests are subject to the same bandwidth constraints as every other HTTP request, and will vary in speed depending on network conditions. Furthermore, many of the services supported by Geocoder are free and thus very popular. Often they cannot keep up with demand and their response times become quite bad.

If your application requires quick geocoding responses you will probably need to pay for a non-free service, or--if you're doing IP address geocoding--use a lookup that doesn't require an external (network-accessed) service.

For IP address lookups in Rails applications, it is generally NOT a good idea to run request.location during a synchronous page load without understanding the speed/behavior of your configured lookup. If the lookup becomes slow, so will your website.

For the most part, the speed of geocoding requests has little to do with the Geocoder gem. Please take the time to learn about your configured lookup before posting performance-related issues.

Unexpected Responses from Geocoding Services

Take a look at the server's raw response. You can do this by getting the request URL in an app console:

Geocoder::Lookup.get(:nominatim).query_url(Geocoder::Query.new("..."))

Replace :nominatim with the lookup you are using and replace ... with the address you are trying to geocode. Then visit the returned URL in your web browser. Often the API will return an error message that helps you resolve the problem. If, after reading the raw response, you believe there is a problem with Geocoder, please post an issue and include both the URL and raw response body.

You can also fetch the response in the console:

Geocoder::Lookup.get(:nominatim).send(:fetch_raw_data, Geocoder::Query.new("..."))

Known Issues

Using count with Rails 4.1+

Due to a change in ActiveRecord's count method you will need to use count(:all) to explicitly count all columns ("*") when using a near scope. Using near and calling count with no argument will cause exceptions in many cases.

Using near with includes

You cannot use the near scope with another scope that provides an includes option because the SELECT clause generated by near will overwrite it (or vice versa).

Instead of using includes to reduce the number of database queries, try using joins with either the :select option or a call to preload. For example:

# Pass a :select option to the near scope to get the columns you want.
# Instead of City.near(...).includes(:venues), try:
City.near("Omaha, NE", 20, select: "cities.*, venues.*").joins(:venues)

# This preload call will normally trigger two queries regardless of the
# number of results; one query on hotels, and one query on administrators.
# Instead of Hotel.near(...).includes(:administrator), try:
Hotel.near("London, UK", 50).joins(:administrator).preload(:administrator)

If anyone has a more elegant solution to this problem I am very interested in seeing it.

Using near with objects close to the 180th meridian

The near method will not look across the 180th meridian to find objects close to a given point. In practice this is rarely an issue outside of New Zealand and certain surrounding islands. This problem does not exist with the zero-meridian. The problem is due to a shortcoming of the Haversine formula which Geocoder uses to calculate distances.

Copyright ©️ 2009-2021 Alex Reisner, released under the MIT license.