0.03
No release in over 3 years
Low commit activity in last 3 years
There's a lot of open issues
Kitchen::Driver::Qemu - A QEMU Driver for Test Kitchen.
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies

Runtime

 Project Readme

kitchen-qemu

A Test Kitchen Driver for QEMU.

Requirements

Test Kitchen and QEMU should be installed. To use KVM acceleration you should have read/write access to /dev/kvm. This is usually done by adding your user to the kvm-group.

Installation and Setup

Driver Installation

This driver is installable via gem install kitchen-qemu. Please read the Kitchen docs for more details on how to configure Kitchen to use this driver.

Image Download

Images for use with kitchen-qemu can be downloaded from

http://esmil.dk/kitchen-qemu/

These are all generated by this cookbook.

Image Creation

Create a bootable image of your favourite *NIX and go through the following checklist:

  1. Create a user for kitchen to use. This can be root but should preferably be a different user. The username kitchen with password kitchen are good choices.

  2. Install sudo and make sure the kitchen user has password-less sudo rights. Eg.

    # echo 'kitchen ALL=(ALL) NOPASSWD: ALL' > /etc/sudoers.d/kitchen
    
  3. By default each instance gets a single network interface. Make sure the image uses DHCP to automatically configure an IPv4 address on this interface. Usually its eth0 or ens3, but can be named something else.

  4. Install an SSH server and make sure it is started automatically at boot and listens on port 22.

  5. Install curl, wget or something similar for downloading Chef from the guest or pre-install the Chef Omnibus package for even faster converge times.

  6. Bonus points for automatically starting a getty on the first serial port. This way you can log into the guest without using SSH like so:

    $ socat -,cfmakeraw,escape=0xf .kitchen/<instance name>.mon
    

    Use Ctrl-o to exit socat.

Berkshelf Workaround

Berkshelf has a bug (they wont fix) that makes it crash if it encounters a named unix socket when uploading cookbooks to the guest. This will happen when uploading the cookbook in the current directory since that includes the .kitchen directory where kitchen-qemu creates two unix sockets for each running instance. One is a "serial terminal" and one is used to shutdown the running instance gracefully.

To work around this bug make Berkshelf ignore the .kitchen directory by adding it to a chefignore file. Eg.

$ echo .kitchen >> chefignore

Alternatively create a Cheffile and let kitchen use Librarian-Chef to resolve cookbook dependencies.

Configuration

image

This setting is required to specify the path to a bootable disk image. It'll only be opened for reading. Any changes shall be written to temporary storage and lost once the instance is destroyed. Eg.:

driver:
  name: qemu

platforms:
  - name: myplatform
    driver:
      image: /path/to/mybootable.qcow2

See above for how to prepare images for use with kitchen-qemu.

For advanced uses this setting can also be a list of maps describing several images to attach to the guest. Eg.:

driver:
  name: qemu

platforms:
  - name: myplatform
    driver:
      image:
        # opened read-only, guest changes discarded when shut down
        - file: /path/to/bootable.qcow2
        # opened read/write, guest changes persisted
        - file: /path/to/writable.qcow2
          snapshot: off
        # opened read-only, guest cannot write to it
        - file: /path/to/readonly.qcow2
          readonly: on

image_path

Specifies the default path for images. That is unless the absolute path to the an image file is given this path is prepended.

Defaults to the following:

  • if the KITCHEN_QEMU_IMAGES environment variable if set use that
  • if XDG_CONFIG_HOME is set use $XDG_CONFIG_HOME/kitchen-qemu
  • if HOME is set use $HOME/.config/kitchen-qemu
  • fall back to /tmp/kitchen-qemu.

This means the following .kitchen.yml will usually look for $HOME/.config/kitchen-qemu/jessie.qcow2 and $HOME/.config/kitchen-qemu/trusty.qcow2.

driver:
  name: qemu

platforms:
  - name: jessie
    driver:
      image: jessie.qcow2
  - name: trusty
    driver:
      image: trusty.qcow2

arch

Determines the QEMU command to run:

  • x86, i386 or 32bit runs qemu-system-i386.
  • x86_64, amd64 or 64bit runs qemu-system-x86_64.

Defaults to x86_64.

binary

Explicitly set which QEMU binary to run.

Defaults to unset which means the binary is guessed from the arch setting.

username

Username to use when SSH'ing to the instance.

Defaults to kitchen.

password

Password to use when first SSH'ing to the instance. This is only used when creating the instance. Subsequent connections will use a built-in RSA key-pair.

Defaults to kitchen.

port

Determines which port QEMU will listen on. Connections to localhost on this port are forwarded to port 22 on the guest which should accept incoming SSH connections there.

Defaults to unset which means a random free port is used.

port_min

Determines the lowest port number to pick when the port is not specified.

Defaults to 1025.

port_min

Determines the highest port number to pick when the port is not specified.

Defaults to 65535.

kvm

Determines whether to enable KVM acceleration or not.

Defaults to unset which means kitchen-qemu will check if /dev/kvm is both readable and writable before enabling KVM.

display

Sets the -display option for QEMU. Set to sdl or gtk to get a virtual screen window. This may be helpful to debug why your image doesn't respond to SSH.

Defaults to `none' which means no window is displayed.

bios

Use bios implementation at the given path.

cpus

Sets the number of virtual CPUs to give the instance. Alternatively set one or more of the following 3 options for more control over the virtual CPU topology.

Defaults to 1.

sockets

Sets the number of CPU sockets in each instance.

Defaults to 1.

cores

Sets the number of cores in each instance CPU.

Defaults to 1.

threads

Sets the number of threads in each instance CPU core.

Defaults to 1.

memory

Determines the number of megabytes of RAM to give the instance.

Defaults to 512 (MiB).

networks

Specify NICs and networks. If not specified it defaults to

suites:
  - name: mysuite
    driver:
      networks:
        - netdev: user,id=user,net=192.168.1.0/24,hostname=%h,hostfwd=tcp::%p-:22
          device: virtio-net-pci,netdev=user

If a netdev entry contains a hostname=%h setting the %h is replaced by the configured hostname of the guest. Similarly when setting hostfwd=.. any %p is replaced by the possibly random port chosen for kitchen to connect to. See the port option above.

hostname

Set the hostname of the guest.

Defaults to the instance name.

hostshares

Share parts of the host filesystem with the guest. Eg.

suites:
  - name: mysuite
    driver:
      hostshares:
        - path: my/shared/directory   # path to export
          mountpoint: /mnt            # mountpoint inside the guest

If the path is not an absolute path it is taken relative to the directory of the .kitchen.yml. The shared path is automatically mounted at the specified mountpoint inside the guest. This is similar to Vagrant's synced_folders, but uses QEMU's builtin 9pfs over virtio feature. On Linux this requires the 9p and 9pnet_virtio modules to be loadable or built in.

acpi_poweroff

Determines how guests are closed when running kitchen destroy. When true an ACPI poweroff event is sent to the guest which is expected to respond by closing down gracefully. This is like pressing a virtual power button on the virtual machine. When false QEMU is simply shut down immediately. This is faster but similar to forcefully pulling the power from the virtual machine.

Defaults to false when all attached disk images are snapshotted or read-only. Otherwise true.

require_chef_omnibus

Determines whether or not a Chef Omnibus package will be installed. There are several different behaviors available:

  • true - the latest release will be installed. Subsequent converges will skip re-installing if chef is present.
  • latest - the latest release will be installed. Subsequent converges will always re-install even if chef is present.
  • <VERSION_STRING> (ex: 10.24.0) - the desired version string will be passed the the install.sh script. Subsequent converges will skip if the installed version and the desired version match.
  • false or nil - no chef is installed.

The default value is unset, or nil.

args

Adds arbitrary command line arguments to the QEMU command line. Example use:

platforms:
  - name: jessie
    driver:
      image: jessie.qcow2
      args:
      - chardev: socket,id=ipmi0,host=localhost,port=9002,reconnect=10
      - device: ipmi-bmc-extern,id=bmc0,chardev=ipmi0
      - device: isa-ipmi-bt,bmc=bmc0

Note: There is no code in kitchen-qemu which ensures that there’s no conflict between args options and options automatically generated by kitchen-qemu. Using args to add more devices needed for a test should be fine though. The arguments are appended to the end of the QEMU command line, behind all other options.

Development

Pull requests are very welcome! Make sure your patches are well tested. Ideally create a topic branch for every separate change you make. For example:

  1. Fork the repo
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Added some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create new Pull Request

Authors

Created and maintained by Emil Renner Berthing <esmil@esmil.dk>

License

GPLv3 or later (see LICENSE)