Rack::Proxy

A request/response rewriting HTTP proxy for Rack. Run it standalone as a tiny reverse proxy, or mount it as middleware and subclass it to rewrite requests and responses in flight.

• Streams by default — response bodies are relayed chunk by chunk straight off the backend socket, so large responses never buffer in memory.
• Safe by default — TLS verification on (VERIFY_PEER), Host-derived backends refused unless explicitly opted in, hop-by-hop headers stripped in both directions, backend failures mapped to 502 instead of raising.
• Small — two files on top of plain Net::HTTP; the only runtime dependency is Rack.

Typical uses:

• an authenticating/authorizing gateway in front of a trusting internal backend
• serving another app from the same origin to avoid CORS complications
• subdomain- or path-based routing to multiple internal services
• redirecting awkward legacy paths (e.g. .php pages) to another app
• inserting or stripping headers that are required — or problematic — for certain clients

• Installation
• Quick start
• How it works
• Options
• Security considerations
• Recipes
• Upgrading
• Header keys and underscores
• Compatibility notes
• Development

Requires Ruby >= 3.0 and Rack 2.x or 3.x. Add to your Gemfile:

gem "rack-proxy", "~> 1.0"

A standalone reverse proxy is one line of config.ru:

require "rack-proxy"

run Rack::Proxy.new(backend: "http://localhost:8080")

As middleware, subclass it and decide per request: call super to proxy, or hand the request to the rest of your app:

class ApiProxy < Rack::Proxy
  def perform_request(env)
    if env["PATH_INFO"].start_with?("/api/")
      env["HTTP_HOST"] = "api.internal.example" # most backends route on Host
      super
    else
      @app.call(env)
    end
  end
end

# Rails (config/initializers/proxy.rb):
Rails.application.config.middleware.use ApiProxy, backend: "https://api.internal.example"

# Any Rack app (config.ru or Sinatra):
use ApiProxy, backend: "https://api.internal.example"

Every request runs through a three-step pipeline:

call(env) → rewrite_env(env) → perform_request(env) → rewrite_response([status, headers, body])

Override the steps you need:

• rewrite_env(env) — modify the request before it is forwarded (HTTP_HOST, path, headers, …). Return the env.
• rewrite_response(triplet) — post-process the backend's [status, headers, body]. Return the triplet. If you change the body, delete or recalculate Content-Length (headers["content-length"] = nil) or clients may receive truncated responses.
• perform_request(env) — take over routing: super proxies the request, @app.call(env) passes it through to the wrapped app (middleware mode).
• backend_allowed?(backend) — per-request allowlist hook, consulted for every request; return false to refuse with 502. See Security considerations.

Two request-scoped overrides can also be set in env (e.g. from rewrite_env):

• env["rack.backend"] — a URI (or URI-parseable string) overriding :backend for this request.
• env["http.read_timeout"] — override :read_timeout for this request.

Pass options when instantiating (Rack::Proxy.new(backend: ...)) or mounting middleware (use ApiProxy, backend: ...).

• :backend — URI (or URI-parseable string) of the backend host/port/scheme to proxy to. If not set, the destination is derived from the incoming request's Host — which is refused by default since 1.0; see :allow_dynamic_backend.
• :allow_dynamic_backend — opt in (true) to deriving the destination from the client-supplied Host header when no :backend is configured. Off by default (such requests get 502), because a bare dynamic proxy is an open proxy. Combine with a backend_allowed? allowlist.
• :streaming — stream the backend response as it arrives (default true). Set to false to buffer the whole response before returning it (also recommended under webmock/vcr — see Compatibility notes).

• :ssl_verify_none — skip TLS certificate verification. Verification is on by default (VERIFY_PEER) — see Upgrading.
• :verify_mode — explicit OpenSSL::SSL::VERIFY_* constant; wins over ssl_verify_none.
• :ca_file — path to a PEM CA bundle used to verify the backend certificate (prefer this over disabling verification for private CAs).
• :cert_store — an OpenSSL::X509::Store used to verify the backend certificate.
• :cert / :key — client certificate and key for mutual TLS to the backend.
• :min_version / :max_version — TLS protocol range (e.g. :TLS1_2), mapped to Net::HTTP#min_version= / #max_version=.
• :ssl_version — deprecated; pins an exact protocol (forbids TLS 1.3). Use :min_version / :max_version.

• :read_timeout — per-read timeout in seconds (default 60).
• :open_timeout — connection-open timeout in seconds.
• :write_timeout — per-write timeout in seconds.
• :max_response_length — cap (in bytes) on the backend response size; a larger response is refused with 502 (streaming aborts once the cap is passed).

• :username / :password — HTTP Basic credentials sent to the backend.
• :strip_credentials — when true, drop the client's Cookie and Authorization headers instead of forwarding them — see Security considerations. The strip applies after rewrite_env, so a credential injected there is stripped too; attach a proxy-owned credential with :username/:password instead.
• :replace_x_forwarded_for — when true, discard the client-supplied X-Forwarded-For chain and forward only this hop's REMOTE_ADDR (default appends to the chain) — see Security considerations.

• :logger — any object responding to #<< (e.g. $stdout, a StringIO, or a Ruby Logger). Wired to Net::HTTP#set_debug_output so the HTTP wire-level conversation is written to the sink.

rack-proxy forwards attacker-influenced requests to a backend and relays the backend's response. Configure and subclass it with that in mind.

• SSRF / open proxy — safe by default since 1.0. If you do not set :backend, the destination host/port/scheme would be derived from the incoming request's Host / X-Forwarded-Host header — meaning a client could steer the proxy at any host, including cloud metadata endpoints (169.254.169.254), loopback, and private ranges. Such requests are now refused with 502 unless you pass allow_dynamic_backend: true. When you do opt in, pin an allowlist on top by overriding backend_allowed?(backend) (consulted for every request, static backends included):

  class MyProxy < Rack::Proxy
    ALLOWED = %w[api.internal.example.com].freeze
  
    def backend_allowed?(backend)
      ALLOWED.include?(backend.host)
    end
  end
  
  MyProxy.new(allow_dynamic_backend: true)

  A refused backend is answered with 502 (with a hint in the :logger output).

• Credential forwarding. All incoming HTTP_* headers are forwarded, including Authorization and Cookie. Don't proxy to a different trust domain with credentials attached — pass strip_credentials: true to drop both (or do finer-grained filtering in rewrite_env). Over an http:// backend these travel in cleartext.

• X-Forwarded-For. rack-proxy appends REMOTE_ADDR to any inbound X-Forwarded-For. If your clients are not behind a trusted proxy, the inbound value is attacker-controlled; pass replace_x_forwarded_for: true to forward only the directly-connected peer's address when the backend trusts that header.

• TLS verification defaults to VERIFY_PEER. For private-CA backends use :ca_file / :cert_store rather than ssl_verify_none: true.

• Resource limits. Use :max_response_length plus :open_timeout / :write_timeout / :read_timeout to bound memory and stalls against a hostile or slow backend.

• Hop-by-hop headers (Connection, TE, Transfer-Encoding, Proxy-Authorization, …) are stripped from both the forwarded request and the response.

To report a vulnerability, see SECURITY.md.

The snippets below (also in examples/ in the repository) are meant to be copied into your app — e.g. into app/middleware/ or lib/ — and adapted. They are not shipped in the gem and cannot be required from it.

From examples/forward_host.rb:

class ForwardHost < Rack::Proxy
  def rewrite_env(env)
    env["HTTP_HOST"] = "example.com"
    env
  end

  def rewrite_response(triplet)
    _, headers, _ = triplet

    # example of inserting an additional header
    headers["X-Foo"] = "Bar"

    # if you rewrite env, it appears that content-length isn't calculated correctly
    # resulting in only partial responses being sent to users
    # you can remove it or recalculate it here
    headers["content-length"] = nil

    triplet
  end
end

# config/initializers/proxy.rb
Rails.application.config.middleware.use ForwardHost, backend: "http://example.com"

From examples/trusting_proxy.rb:

class TrustingProxy < Rack::Proxy
  def rewrite_env(env)
    env["HTTP_HOST"] = "self-signed.badssl.com"
    env
  end

  def rewrite_response(triplet)
    _, headers, _ = triplet

    # if you rewrite env, it appears that content-length isn't calculated correctly
    # resulting in only partial responses being sent to users
    # you can remove it or recalculate it here
    headers["content-length"] = nil

    triplet
  end
end

# Mount it with an explicit backend (dynamic Host-derived backends are refused
# by default since 1.0). Pass ssl_verify_none: true to skip TLS verification.
Rails.application.config.middleware.use TrustingProxy,
  backend: "https://self-signed.badssl.com",
  ssl_verify_none: true

For a backend signed by a private CA, prefer ca_file: "/path/to/ca.pem" over disabling verification.

From examples/example_service_proxy.rb:

###
# This is an example of how to use Rack-Proxy in a Rails application.
#
# Setup:
# 1. rails new test_app
# 2. cd test_app
# 3. install Rack-Proxy in `Gemfile`
#    a. `gem 'rack-proxy', '~> 1.0'`
# 4. install gem: `bundle install`
# 5. copy the class into your app and mount it from `config/initializers/proxy.rb`
# 6. run: `SERVICE_URL=http://guides.rubyonrails.org rails server`
# 7. open in browser: `http://localhost:3000/example_service`
#
###
ENV["SERVICE_URL"] ||= "http://guides.rubyonrails.org"

class ExampleServiceProxy < Rack::Proxy
  def perform_request(env)
    request = Rack::Request.new(env)

    # use rack proxy for anything hitting our host app at /example_service
    if %r{^/example_service}.match?(request.path)
      backend = URI(ENV["SERVICE_URL"])
      # most backends required host set properly, but rack-proxy doesn't set this for you automatically
      # even when a backend host is passed in via the options
      env["HTTP_HOST"] = backend.host

      # This is the only path that needs to be set currently on Rails 5 & greater
      env["PATH_INFO"] = ENV["SERVICE_PATH"] || "/configuring.html"

      # don't send your sites cookies to target service, unless it is a trusted internal service that can parse all your cookies
      env["HTTP_COOKIE"] = ""
      super
    else
      @app.call(env)
    end
  end
end

From examples/rack_php_proxy.rb:

###
# Open http://localhost:3000/test.php to trigger proxy
###
class RackPhpProxy < Rack::Proxy
  def perform_request(env)
    request = Rack::Request.new(env)
    if %r{\.php}.match?(request.path)
      env["HTTP_HOST"] = ENV["HTTP_HOST"] ? URI(ENV["HTTP_HOST"]).host : "localhost"
      ENV["PHP_PATH"] ||= "/manual/en/tutorial.firstpage.php"

      # Rails 3 & 4
      env["REQUEST_PATH"] = ENV["PHP_PATH"] || "/php/#{request.fullpath}"
      # Rails 5 and above
      env["PATH_INFO"] = ENV["PHP_PATH"] || "/php/#{request.fullpath}"

      env["content-length"] = nil

      super
    else
      @app.call(env)
    end
  end

  def rewrite_response(triplet)
    _, headers, _ = triplet

    # if you proxy depending on the backend, it appears that content-length isn't calculated correctly
    # resulting in only partial responses being sent to users
    # you can remove it or recalculate it here
    headers["content-length"] = nil

    triplet
  end
end

Mount it in Rails (config/application.rb):

config.middleware.use RackPhpProxy, backend: "http://php.net"

or in Sinatra / any Rack app:

class MyAwesomeSinatra < Sinatra::Base
  use RackPhpProxy, backend: "http://php.net"
end

Requests matching the condition are proxied; everything else runs through your application as usual. See the tests for more examples.

Useful when an external integration (OAuth callbacks, webhooks) insists on talking HTTPS to your dev machine: terminate TLS locally and forward the decrypted traffic to your app running on plain HTTP.

# config.ru
require "rack-proxy"

class ForwardProto < Rack::Proxy
  def rewrite_env(env)
    env["HTTP_X_FORWARDED_HOST"] = env["SERVER_NAME"]
    env["HTTP_X_FORWARDED_PROTO"] = env["rack.url_scheme"]
    env
  end
end

run ForwardProto.new(backend: "http://localhost:8080")

Generate a key/certificate pair for your dev hostname and serve the proxy over TLS, e.g. with puma:

puma -b 'ssl://0.0.0.0:9292?key=keys/domain.key&cert=keys/domain.crt' config.ru

Point the dev hostname at yourself (127.0.0.1 debug.your_app.com in /etc/hosts), and make sure your app honors X-Forwarded-Host / X-Forwarded-Proto from this trusted hop (e.g. server.forward-headers-strategy: framework in Spring Boot, or Rails' default config.action_dispatch handling).

When a third-party API authenticates clients with TLS certificates, terminate the client's request and re-sign the outgoing connection:

# config.ru
cert = OpenSSL::X509::Certificate.new(File.read("./certs/client.crt"))
key = OpenSSL::PKey.read(File.read("./certs/key.pem"))

use TLSProxy, backend: "https://client-tls-auth-api.com",
  cert: cert, key: key, min_version: :TLS1_2

# tls_proxy.rb
class TLSProxy < Rack::Proxy
  def rewrite_env(env)
    env["HTTP_HOST"] = "client-tls-auth-api.com:443"
    env
  end
end

1.0.0 is a breaking release; the full list is in CHANGELOG.md. The changes most likely to need action:

Host-derived backends now require an explicit opt-in. If you rely on the destination being derived from the request's Host header (no :backend option — this includes every subclass that routes by rewriting env["HTTP_HOST"]), such requests now return 502. Restore the behavior explicitly, ideally with an allowlist:

class MyProxy < Rack::Proxy
  def backend_allowed?(backend)
    %w[api.internal.example.com].include?(backend.host)
  end
end

MyProxy.new(allow_dynamic_backend: true)

Deployments with a fixed :backend (or that set env["rack.backend"] in rewrite_env) need no change.

Backend failures return 502 instead of raising. If you rescued OpenSSL::SSL::SSLError, Errno::ECONNREFUSED, timeouts, etc. around the proxy, inspect the response status instead. Malformed request URIs map to 400 and unknown HTTP methods to 501.

require "rack_proxy_examples/..." is gone. The examples are copy-paste snippets in examples/ now — copy the class into your app and mount it yourself.

net_http_hacked is gone. The library streams via the public Net::HTTP API; if external code called begin_request_hacked/end_request_hacked, vendor the old file from a 0.8.x release and plan a migration.

Other behavior changes to be aware of: hop-by-hop request headers (including Proxy-Authorization) are no longer forwarded; gzip bodies are forwarded still-compressed in streaming: false mode (inflate in rewrite_response if you inspect body text); body-less POST/PUT sends Content-Length: 0; Ruby >= 3.0 and Rack 2.x–3.x are required.

TLS certificate verification is now on by default. Prior versions silently used OpenSSL::SSL::VERIFY_NONE whenever the backend was HTTPS, which disabled certificate checks. 0.8.0 defaults to VERIFY_PEER to match Ruby's Net::HTTP.

If you proxy to a backend with a self-signed or otherwise untrusted certificate, you'll now get an OpenSSL::SSL::SSLError unless you opt out explicitly:

Rack::Proxy.new(ssl_verify_none: true)              # or
Rack::Proxy.new(verify_mode: OpenSSL::SSL::VERIFY_NONE)

For internal services with a private CA, prefer setting ca_file/cert_store over disabling verification altogether.

Per the standard Rack/CGI convention, header names received by your proxy are exposed in the env with underscores (HTTP_X_CUSTOM_HEADER), and rack-proxy rewrites them with dashes (X-Custom-Header) when forwarding. This conversion is lossy: by the time a request reaches rack-proxy, the upstream web server (nginx, Apache, Caddy, Puma) has already collapsed both X-Custom-Header and X_Custom_Header into the same env key, and rack-proxy cannot recover the original spelling (see #96).

If you need underscore-style headers preserved end-to-end, configure your fronting web server (e.g. underscores_in_headers on; in nginx, or HTTPProtocolOptions in Apache) — rack-proxy is not the right layer to fix this.

The streaming response path (the default) streams straight off the backend socket via Net::HTTP. Historically it relied on private net/http internals and did not work at all under webmock, vcr, or fakeweb; it now uses only the public Net::HTTP#request API, but those libraries still replace the real network layer, so behavior under them is not guaranteed. In tests that stub HTTP, prefer streaming: false.

bundle install
bundle exec rake test            # full suite, fully offline, ~2-3s
LIVE=1 bundle exec rake test     # additionally runs real-internet smoke tests
bundle exec standardrb           # style check (CI-blocking)

Bug reports and pull requests are welcome — see CONTRIBUTING.md for the workflow and CLAUDE.md for the invariants every change must preserve. Release history lives in CHANGELOG.md.

Released under the MIT License.