No commit activity in last 3 years
No release in over 3 years
ruby-prof is a fast code profiler for Ruby. It is a C extension and therefore is many times faster than the standard Ruby profiler. It supports both flat and graph profiles. For each method, graph profiles show how long the method ran, which methods called it and which methods it called. RubyProf generate both text and html and can output it to standard out or to a file.
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
 Dependencies

Development

 Project Readme
= ruby-prof

== Overview

ruby-prof is a fast code profiler for Ruby.  Its features include:

* Speed - it is a C extension and therefore many times faster than the standard Ruby profiler.
* Modes - Ruby prof can measure a number of different parameters, including
          call times, memory usage and object allocations. 
* Reports - can generate text and cross-referenced html reports
  - Flat Profiles - similar to the reports generated by the standard Ruby profiler
  - Graph profiles - similar to GProf, these show how long a method runs, which methods call it and which methods it calls.
  - Call tree profiles - outputs results in the calltree format suitable for the KCacheGrind profiling tool.
* Threads - supports profiling multiple threads simultaneously
* Recursive calls - supports profiling recursive method calls


== Requirements

ruby-prof requires Ruby 1.8.4 or higher.

If you are running Linux or Unix you'll need a C compiler so the extension
can be compiled when it is installed.

If you are running Windows, then you may need to install the 
Windows specific RubyGem which includes an already built extension (see below).

== Install

The easiest way to install ruby-prof is by using Ruby Gems.  To install:

<tt>gem install ruby-prof</tt>

If you on windows mswin [not mingw] (check via ruby -v) and 
don't have an MSVC compiler, please install v0.7.3 which 
has a prebuilt binary
C:> gem install ruby-prof -v0.7.3

If you're on mingw, please install the devkit first, then install the latest version (gem install ruby-prof).

== Usage

There are three ways of running ruby-prof.

=== ruby-prof executable

The first is to use ruby-prof to run the Ruby program
you want to profile.  For more information refer to
the ruby-prof documentation[link:files/bin/ruby-prof.html].


=== ruby-prof API

The second way is to use the ruby-prof API to profile
particular segments of code.  

  require 'ruby-prof'
  
  # Profile the code
  RubyProf.start
  ...
  [code to profile]
  ...
  result = RubyProf.stop
  
  # Print a flat profile to text
  printer = RubyProf::FlatPrinter.new(result)
  printer.print(STDOUT)
  
Alternatively, you can use a block to tell ruby-prof what
to profile:

  require 'ruby-prof'
  
  # Profile the code
  result = RubyProf.profile do
    ...
    [code to profile]
    ...
  end
  
  # Print a graph profile to text
  printer = RubyProf::GraphPrinter.new(result)
  printer.print(STDOUT, 0)

Starting with the 0.6.1 release, ruby-prof also supports pausing and resuming
profiling runs.

  require 'ruby-prof'
  
  # Profile the code
  RubyProf.start
  [code to profile]
  RubyProf.pause
  [other code]
  RubyProf.resume
  [code to profile]
  result = RubyProf.stop
  
Note that resume will automatically call start if a profiling run
has not yet started.  In addition, resume can also take a block:

  require 'ruby-prof'
  
  # Profile the code
  RubyProf.resume do
    [code to profile]
  end

  data = RubyProf.stop
  
With this usage, resume will automatically call pause at the 
end of the block.


=== require unprof

The third way of using ruby-prof is by requiring unprof.rb:

  require 'unprof'

This will start profiling immediately and will output the results
using a flat profile report.

This method is provided for backwards compatibility.  Using
{ruby-prof}[link:files/bin/ruby-prof.html] provides more flexibility.


== Profiling Tests

Starting with the 0.6.1 release, ruby-prof supports profiling tests cases
written using Ruby's built-in unit test framework (ie, test derived from 
Test::Unit::TestCase).  To enable profiling simply add the following line 
of code to within your test class:
  
  	include RubyProf::Test
  	
Each test method is profiled separately.  ruby-prof will run each test method
once as a warmup and then ten additional times to gather profile data.
Note that the profile data will *not* include the class's setup or 
teardown methods.

Separate reports are generated for each method and saved, by default, 
in the test process's working directory.  To change this, or other profiling
options, modify your test class's PROFILE_OPTIONS hash table. To globally 
change test profiling options, modify RubyProf::Test::PROFILE_OPTIONS.  


== Profiling Rails

To profile a Rails application it is vital to run it using production like 
settings (cache classes, cache view lookups, etc.).  Otherwise, Rail's
dependency loading code will overwhelm any time spent in the application
itself (our tests show that Rails dependency loading causes a roughly 6x
slowdown).  The best way to do this is create a new Rails environment,
profile.rb.

So to profile Rails:

1.  Create a new profile.rb environment - or simply copy the example file
    in ruby-prof/rails/environment/profile.rb
    
2.  Copy the file:
     
      ruby-prof/rails/profile_test_helper.rb 
    
    To:
    
      your_rails_app/test/profile_test_helper.rb

3.  Create a new test directory for profiling:

      your_rails_app/test/profile
    

4.  Write unit, functional or integration tests specifically designed
    to profile some part of your Rails application.  At the top
    of each test, replace this line:
    
      require File.dirname(__FILE__) + '/../test_helper'

    With:
    
      require File.dirname(__FILE__) + '/../profile_test_helper'

    For example:

    require File.dirname(__FILE__) + '/../profile_test_helper'
    
    class ExampleTest < Test::Unit::TestCase
      include RubyProf::Test
      fixtures ....
      
      def test_stuff
        puts "Test method"
      end
    end   

5.  Now run your tests.  Results will be written to:

      your_rails_app/tmp/profile
    

== Reports

ruby-prof can generate a number of different reports:

* Flat Reports
* Graph Reports
* HTML Graph Reports
* Call graphs

Flat profiles show the overall time spent in each method.  They
are a good of quickly identifying which methods take the most time.
An example of a flat profile and an explanation can be found in
{examples/flat.txt}[link:files/examples/flat_txt.html].

Graph profiles also show the overall time spent in each method.
In addition, they also show which methods call the current
method and which methods its calls.  Thus they are good for
understanding how methods gets called and provide insight into
the flow of your program.  An example text graph profile
is located at {examples/graph.txt}[link:files/examples/graph_txt.html].

HTML Graph profiles are the same as graph profiles, except
output is generated in hyper-linked HTML. Since graph profiles
can be quite large, the embedded links make it much easier to
navigate the results.  An example html graph profile
is located at {examples/graph.html}[link:files/examples/graph_html.html].

HTML Graph profiles are the same as graph profiles, except
output is generated in hyper-linked HTML. Since graph profiles
can be quite large, the embedded links make it much easier to
navigate the results.  An example html graph profile
is located at {examples/graph.html}[link:files/examples/graph_html.html].

Call graphs output results in the calltree profile format which is used
by KCachegrind.  Call graph support was generously donated by Carl Shimer.
More information about the format can be found at
the {KCachegrind}[link:http://kcachegrind.sourceforge.net/cgi-bin/show.cgi/KcacheGrindCalltreeFormat] site.


== Printers

Reports are created by printers.  Supported printers include:

* RubyProf::FlatPrinter - Creates a flat report in text format
* RubyProf::FlatPrinterWithLineNumbers - same as above but more verbose
* RubyProf::GraphPrinter - Creates a call graph report in text format
* RubyProf::GraphHtmlPrinter - Creates a call graph report in HTML (separate files per thread)
* RubyProf::CallTreePrinter - Creates a call tree report compatible with KCachegrind.

To use a printer:

  ...
  result = RubyProf.end
  printer = RubyProf::GraphPrinter.new(result)
  printer.print(STDOUT, :min_percent => 2)

The first parameter is any writable IO object such as STDOUT or a file.
The second parameter, specifies the minimum percentage a method must take 
to be printed.  Percentages should be specified as integers in the range 0 to 100.  
For more information please see the documentation for the different printers.

The other option is :print_file => true (default false), which adds the filename to the
output (GraphPrinter only).

== Measurements

Depending on the mode and platform, ruby-prof can measure various
aspects of a Ruby program.  Supported measurements include:

* process time (RubyProf::PROCESS_TIME)
* wall time (RubyProf::WALL_TIME)
* cpu time (RubyProf::CPU_TIME)
* object allocations (RubyProf::ALLOCATIONS)
* memory usage (RubyProf::MEMORY)
* garbage collections runs (RubyProf::GC_RUNS)
* garbage collection time (RubyProf::GC_TIME)

Process time measures the time used by a process between any two moments.
It is unaffected by other processes concurrently running 
on the system. Note that Windows does not support measuring process
times - therefore, measurements on Windows defaults to wall time.

Wall time measures the real-world time elapsed between any two moments.
If there are other processes concurrently running on the system
that use significant CPU or disk time during a profiling run
then the reported results will be too large.

CPU time uses the CPU clock counter to measure time.  The returned
values are dependent on the correctly setting the CPU's frequency.
This mode is only supported on Pentium or PowerPC platforms (linux only).

Object allocation reports show how many objects each method in
a program allocates.  This support was added by Sylvain Joyeux
and requires a patched Ruby interpreter.  For more information and
the patch, please see:
http://rubyforge.org/tracker/index.php?func=detail&aid=11497&group_id=426&atid=1700

Memory usage reports show how much memory each method in a program
uses.  This support was added by Alexander Dymo and requires a
patched Ruby interpreter.  For more information, see:
http://rubyforge.org/tracker/index.php?func=detail&aid=17676&group_id=1814&atid=7062

Garbage collection runs report how many times Ruby's garbage collector
is invoked during a profiling session.  This support was added by Jeremy
Kemper and requires a patched Ruby interpreter.  For more information, see:
http://rubyforge.org/tracker/index.php?func=detail&aid=17676&group_id=1814&atid=7062

Garbage collection time reports how much time is spent in Ruby's garbage collector
during a profiling session.  This support was added by Jeremy Kemper
and requires a patched Ruby interpreter.  For more information, see:
http://rubyforge.org/tracker/index.php?func=detail&aid=17676&group_id=1814&atid=7062

To set the measurement:

* RubyProf.measure_mode = RubyProf::PROCESS_TIME
* RubyProf.measure_mode = RubyProf::WALL_TIME
* RubyProf.measure_mode = RubyProf::CPU_TIME
* RubyProf.measure_mode = RubyProf::ALLOCATIONS
* RubyProf.measure_mode = RubyProf::MEMORY
* RubyProf.measure_mode = RubyProf::GC_RUNS
* RubyProf.measure_mode = RubyProf::GC_TIME

The default value is RubyProf::PROCESS_TIME.

You may also specify the measure_mode by using the RUBY_PROF_MEASURE_MODE
environment variable:

* export RUBY_PROF_MEASURE_MODE=process
* export RUBY_PROF_MEASURE_MODE=wall
* export RUBY_PROF_MEASURE_MODE=cpu
* export RUBY_PROF_MEASURE_MODE=allocations
* export RUBY_PROF_MEASURE_MODE=memory
* export RUBY_PROF_MEASURE_MODE=gc_runs
* export RUBY_PROF_MEASURE_MODE=gc_time
  
Note that these values have changed since ruby-prof-0.3.0.  

On Linux, process time is measured using the clock method provided 
by the C runtime library. Note that the clock method does not
report time spent in the kernel or child processes and therefore
does not measure time spent in methods such as Kernel.sleep method.
If you need to measure these values, then use wall time.  Wall time
is measured using the gettimeofday kernel method.

On Windows, timings default to wall times.  If you set the clock 
mode to PROCESS_TIME, then timing are read using the clock method
provided by the C runtime library.  Note though, these values are
wall times on Windows and not process times like on Linux.
Wall time is measured using the GetLocalTime API.

If you use wall time, the results will be affected by other
processes running on your computer, network delays, disk access,
etc.  As result, for the best results, try to make sure your
computer is only performing your profiling run and is 
otherwise quiescent.

On both platforms, cpu time is measured using the RDTSC assembly
function provided by the Pentium and PowerPC platforms. CPU time
is dependent on the cpu's frequency.  On Linux, ruby-prof attempts 
to read this value from "/proc/cpuinfo."  On Windows, you must
manually specify the clock frequency.  This can be done using the
RUBY_PROF_CPU_FREQUENCY environment variable:

  export RUBY_PROF_CPU_FREQUENCY=<value>
  
You can also directly set the cpu frequency by calling:

  RubyProf.cpu_frequency = <value> 


== Recursive Calls

Recursive calls occur when method A calls method A and cycles
occur when method A calls method B calls method C calls method A.
ruby-prof detects both direct recursive calls and cycles.  Both
are indicated in reports by a "d number" in parentheses following a method
name.  For example, here is a flat profile from the test method

RecursiveTest#test_recursive:

%self     total     self     wait    child    calls  name
100.00      2.00     2.00     0.00     0.00        2  Kernel#sleep
  0.00      2.00     0.00     0.00     2.00        0  RecursiveTest#test_cycle
  0.00      0.00     0.00     0.00     0.00        2  Fixnum#==
  0.00      0.00     0.00     0.00     0.00        2  Fixnum#-
  0.00      1.00     0.00     0.00     1.00        1  Object#sub_cycle(d1)
  0.00      2.00     0.00     0.00     2.00        1  Object#sub_cycle
  0.00      2.00     0.00     0.00     2.00        1  Object#cycle
  0.00      1.00     0.00     0.00     1.00        1  Object#cycle(d1)

Notice the presence of Object#cycle and Object#cycle(d1).  The d1 means
depth 1 -- the method was either recursively called (directly or indirectly).

However, the self time values for recursive calls should always 
be accurate.  It is also believed that the total times are
accurate, but these should be carefully analyzed to verify their veracity.

== Multi-threaded Applications

Unfortunately, Ruby does not provide an internal api
for detecting thread context switches in 1.8.  As a result, the
timings ruby-prof reports for each thread may be slightly
inaccurate.  In particular, this will happen for newly 
spawned threads that go to sleep immediately (their first call).  
For instance, if you use Ruby's timeout library to wait for 2 seconds,
the 2 seconds will be assigned to the foreground thread
and not the newly created background thread.  These errors
can largely be avoided if the background thread performs any
operation before going to sleep. 

== Performance

Significant effort has been put into reducing ruby-prof's overhead
as much as possible.  Our tests show that the overhead associated
with profiling code varies considerably with the code being
profiled.  Most programs will run approximately twice as slow
while highly recursive programs (like the fibonacci series test)
will run three times slower.

Because of some threading difficulties in 1.9, it currently runs a bit slower there.
http://www.ruby-forum.com/topic/201329

== License

See LICENSE for license information.

== Development

Code is located at http://github.com/rdp/ruby-prof