$Id: README.txt 204 2010-11-30 02:20:04Z pwilkins $ sm-transcript reads results of SLS processing and produces transcripts for the SpokenMedia browser. For each file in the source folder whose extension matches the source type, a file of destination type is created in the destination folder. All of these parameters have default values. Note: Examples of the commands you enter in the terminal are for *nix. The command prompt in the examples is: felix$ <command line> If you are a Windows user, make the usual adjustments. Requirements: sm-transcript is written in Ruby and packaged as a RubyGem. Since Ruby is not a compiled language, you will need to have Ruby installed on your machine to run sm-transcript. You can determine if Ruby is installed by typing "ruby -v" at a terminal prompt. It should return the version of Ruby that is installed. If Ruby is not installed on your machine, navigate to http://www.ruby-lang.org/ and follow the installation instructions. sm-transcript was developed using Ruby 1.8. Other Ruby versions have not been tested as of this release. Installation: You can get sm-transcript as either a RubyGem or as source from svn. The preferred way to install this package is as a Rubygem. You can download and install the gem with this command: felix$ sudo gem install [--verbose] sm-transcript This command downloads the most recent version of the gem from rubygems.org and makes it active. Previous versions of the gem remain installed, but are deactivated. You must use "sudo" to properly install the gem. If you execute "gem install" (omitting the "sudo") the gem is installed in your home gem repository and it isn't in your path without additional configuration. Note: You need sudo privileges to run the command as written. If you can't sudo, then you can install it locally and will need some additional configuration. Contact me (or your local Ruby wizard) for assistance. The executable is now in your path. You can cleanly uninstall the gem with this command: felix$ sudo gem uninstall sm-transcript If you have access to our svn repository, you are welcome to check out the code. Be warned that the trunk tip is not necessarily stable. It changes frequently as enhancements (and bug fixes) are added. (note that the 'smb_transcript' in the command line below is not a typo.) svn co svn+ssh://svn.mit.edu/oeit-tsa/SMB/smb_transcript/trunk sm_transcript build the gem by running this command from the directory you installed the source. This is what it looks like on my machine: felix$ rake gem The gem will be built and put in ./pkg You can now use the gem installation instructions above. Using the App: Run with no command line parameters, the app reads *.wrd files out of ./results and writes *.t1.html files to ./transcripts. These directories are relative to where sm_transcript is called. Note: destination files are overwritten without a warning prompt. If you want to preserve an existing output file, rename it before running the app again. For example, run the app by navigating to the bin folder and enter projects/sm_transcript/bin felix$ sm_transcript This command run from this folder will read *.wrd files from bin/results and write *-t1.html to bin/transcripts. Usage: sm_transcript [options] --srcdir PATH Read files from this folder (Default: ./results) --destdir PATH Write files to this folder (Default: ./transcripts) --srctype wrd | seg | txt | ttml | srt Kind of file to process (Default: wrd) --desttype html | ttml | datajs | json Kind of file to output (Default: html) -h, --help Show this message There is a serious gotch'a in specifying the srctype parameter: it must match the case of the file extension that you're processing. This means that if the srt files that you are processing have the extension .SRT, then you must specify the srctype as "SRT". Pretty lame, I know. I will update the gem with a fix shortly. My apologies until then. Troubleshooting: sm-transcript requires additional gems to operate. The RubyGem installation should install dependencies automatically, but when it doesn't, you get an error that includes ... no such file to load -- builder (LoadError) in the first few lines when you run sm-transcript, the problem is a missing dependent gem. (the error above indicates that the Builder gem is missing.) Try installing the missing gem. For the error above, the command looks like this on my computer: felix$ sudo gem install builder See "Required Gems" below for more information. A warning message such as: "WARNING: Nokogiri was built against LibXML version 2.7.6, but has dynamically loaded 2.7.7"" may be safely ignored. If you continue to have trouble, feel free to contact me. Upgrading: You can easily upgrade by simply executing the same command you used to install the gem. Running install again will add the newer version and make it active. By default the most recent version is used, but older versions are still available, simply inactive. If are using svn, you should already know what to do. Required Gems: builder - create structured data, such as XML extensions - added for the 'require_relative' command. (To get this command in Ruby 1.8 you need to install this gem, for Ruby 1.9 the command is already part of the core.) htmlentities - html parsing json - create JSON structured data nokogiri - xml parsing library optparse - option parsing of command line ostruct - open data structures ppcommand - pp is a pretty printer. It is used only for debugging rake - make for Ruby rubygems - support for gems (shouldn't be needed for Ruby 1.9) shoulda - enhancement for Test::Unit This command installs gems on OSX and Linux: felix$ sudo gem install <gem name> I recommend running the following command to update to latest version of rubygems before loading new gems. felix$ sudo gem update --system Unit Tests: You may run all unit tests by navigating to the test folder and running rake with no parameters (the default rake task runs all tests). On my computer, it looks like this: projects/sm_transcript/test felix$ rake Release Notes: Initial Version - runs under Ruby 1.8.x. version 0.0.4 - fixes bug when processing .WRD files with CRLF line endings. version 0.0.5 - removed due to posting error version 0.0.6 - added srctype of ttml and desttype of json, fixed bug where beginning time of word was actually for previous word. version 0.0.7 - added srt as srctype version 0.0.8 - fixed bug that dropped last phrase from transcripts version 1.0.0 - declared this version 1.0.0 to conform more closely with gem numbering conventions. All tests run successfully. To Do: - specify individual files for processing rather than folders - fix bug in srt processing: can't read Creole srt content. - allow user to modify the "t1" file extension for addition languages of the same transcript. - update code to run under Ruby 1.9

== PintosCheck -- Auto Pintos Checker to Save the Day == == Functionalities == The functionality of this simple script is to download pintos homework assignments from the mail inbox and then run through all the desired tests and finally generate reports in plain text or html formats, all automatically. == Requirements For Running PintosCheck == Since all the scripts are written in ruby, PintosCheck require ruby installed on the system. I use ruby 1.8.7 for development, but ruby 1.9.* versions are expected to function as well. However, ruby 1.8.6 and lower versions are not supported. For information of downloading and installing ruby, see http://www.ruby-lang.org/en/downloads/. In addition to ruby itself, RubyGems 1.3.* is also required because it hosts the installation source for this project and almost all other ruby projects as well. To download or update RubyGems, please go to http://gemcutter.org/pages/download for more information. == Installation == Once you have all the requirements on your system, it's really easy to install PintosCheck. In the UNIX shell or Windows command line environment, type the following command(sudo if needed): gem install pintoscheck --include-dependencies Go grab a cup of coffee, and PintosCheck will automatically download and install itself onto the system. To check the installation, type 'ptschk --version', and if something like 'PintosCheck 0.1.0' pops up then you're green to go! == Finally, how do I check my students' pintos homework? == This project ships with a 'ptschk' command tool. This tool needs a task configuration file to actually do everything. The configuration file is in YAML format, which is basically a recursive key-value pair representation. If you're using PintosCheck for the first time, there's a very nice command line option to generate the skeleton for you. Just run 'ptschk init my_first_task.config' and a file named 'my_first_task.config' will be generated for you. Inside this file there is a set of the minimal options for the task to run properly, and you just have to fill in what you need. After you set up your configuration file, run 'ptschk run my_first_task.config' and the tasks will kick off immediately, and after a while the report will be generated. A detailed configuration options for advanced task setup will be available in production release of this project.

Simple type-checking for Ruby

ALPHA Alert -- just uploaded initial release. Linux inotify is a means to receive events describing file system activity (create, modify, delete, close, etc). Sinotify was derived from aredridel's package (http://raa.ruby-lang.org/project/ruby-inotify/), with the addition of Paul Boon's tweak for making the event_check thread more polite (see http://www.mindbucket.com/2009/02/24/ruby-daemons-verifying-good-behavior/) In sinotify, the classes Sinotify::PrimNotifier and Sinotify::PrimEvent provide a low level wrapper to inotify, with the ability to establish 'watches' and then listen for inotify events using one of inotify's synchronous event loops, and providing access to the events' masks (see 'man inotify' for details). Sinotify::PrimEvent class adds a little semantic sugar to the event in to the form of 'etypes', which are just ruby symbols that describe the event mask. If the event has a raw mask of (DELETE_SELF & IS_DIR), then the etypes array would be [:delete_self, :is_dir]. In addition to the 'straight' wrapper in inotify, sinotify provides an asynchronous implementation of the 'observer pattern' for notification. In other words, Sinotify::Notifier listens in the background for inotify events, adapting them into instances of Sinotify::Event as they come in and immediately placing them in a concurrent queue, from which they are 'announced' to 'subscribers' of the event. [Sinotify uses the 'cosell' implementation of the Announcements event notification framework, hence the terminology 'subscribe' and 'announce' rather then 'listen' and 'trigger' used in the standard event observer pattern. See the 'cosell' package on github for details.] A variety of 'knobs' are provided for controlling the behavior of the notifier: whether a watch should apply to a single directory or should recurse into subdirectores, how fast it should broadcast queued events, etc (see Sinotify::Notifier, and the example in the synopsis section below). An event 'spy' can also be setup to log all Sinotify::PrimEvents and Sinotify::Events. Sinotify::Event simplifies inotify's muddled event model, sending events only for those files/directories that have changed. That's not to say you can't setup a notifier that recurses into subdirectories, just that any individual event will apply to a single file, and not to its children. Also, event types are identified using words (in the form of ruby :symbols) instead of inotify's event masks. See Sinotify::Event for more explanation. The README for inotify: http://www.kernel.org/pub/linux/kernel/people/rml/inotify/README Selected quotes from the README for inotify: * "Rumor is that the 'd' in 'dnotify' does not stand for 'directory' but for 'suck.'" * "The 'i' in inotify does not stand for 'suck' but for 'inode' -- the logical choice since inotify is inode-based." (The 's' in 'sinotify' does in fact stand for 'suck.')

isup is a command line utility to check if a site is up or down. Type 'isup -h' to see the help page.

rails-tc bundles everything required to properly setup type checking with sorbet in rails projects

Ame Ame provides a simple command-line interface API for Ruby¹. It can be used to provide both simple interfaces like that of ‹rm›² and complex ones like that of ‹git›³. It uses Ruby’s own classes, methods, and argument lists to provide an interface that is both simple to use from the command-line side and from the Ruby side. The provided command-line interface is flexible and follows commond standards for command-line processing. ¹ See http://ruby-lang.org/ ² See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/rm.html ³ See http://git-scm.com/docs/ § Usage Let’s begin by looking at two examples, one where we mimic the POSIX¹ command-line interface to the ‹rm› command. Looking at the entry² in the standard, ‹rm› takes the following options: = -f. = Do not prompt for confirmation. = -i. = Prompt for confirmation. = -R. = Remove file hierarchies. = -r. = Equivalent to /-r/. It also takes the following arguments: = FILE. = A pathname or directory entry to be removed. And actually allows one or more of these /FILE/ arguments to be given. We also note that the ‹rm› command is described as a command to “remove directory entries”. ¹ See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/contents.html ² See http://pubs.opengroup.org/onlinepubs/9699919799/utilities/rm.html Let’s turn this specification into one using Ame’s API. We begin by adding a flag for each of the options listed above: class Rm &lt; Ame::Root flag 'f', '', false, 'Do not prompt for confirmation' flag 'i', '', nil, 'Prompt for confirmation' do |options| options['f'] = false end flag 'R', '', false, 'Remove file hierarchies' flag 'r', '', nil, 'Equivalent to -R' do |options| options['r'] = true end A flag¹ is a boolean option that doesn’t take an argument. Each flag gets a short and long name, where an empty name means that there’s no corresponding short or long name for the flag, a default value (true, false, or nil), and a description of what the flag does. Each flag can also optionally take a block that can do further processing. In this case we use this block to modify the Hash that maps option names to their values passed to the block to set other flags’ values than the ones that the block is associated with. As these flags (‘i’ and ‘r’) aren’t themselves of interest, their default values have been set to nil, which means that they won’t be included in the Hash that maps option names to their values when passed to the method. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#flag-class-method There are quite a few other kinds of options besides flags that can be defined using Ame, but flags are all that are required for this example. We’ll get to the other kinds in later examples. Next we add a “splus” argument. splus 'FILE', String, 'File to remove' A splus¹ argument is like a Ruby “splat”, that is, an Array argument at the end of the argument list to a method preceded by a star, except that a splus requires at least one argument. A splus argument gets a name for the argument (‹FILE›), the type of argument it represents (String), and a description. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splus-class-method Then we add a description of the command (method) itself: description 'Remove directory entries' Descriptions¹ will be used in help output to assist the user in using the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#description-class-method Finally, we add the Ruby method that’ll implement the command (all preceding code included here for completeness): class Rm &lt; Ame::Root version '1.0.0' flag 'f', '', false, 'Do not prompt for confirmation' flag 'i', '', nil, 'Prompt for confirmation' do |options| options['f'] = false end flag 'R', '', false, 'Remove file hierarchies' flag 'r', '', nil, 'Equivalent to -R' do |options| options['r'] = true end splus 'FILE', String, 'File to remove' description 'Remove directory entries' def rm(files, options = {}) require 'fileutils' FileUtils.send options['R'] ? :rm_r : :rm, [first] + rest, :force =&gt; options['f'] end end Actually, another bit of code was also added, namely version '1.0.0' This sets the version¹ String of the command. This information is used when the command is invoked with the “‹--version›” flag. This flag is automatically added, so you don’t need to add it yourself. Another flag, “‹--help›”, is also added automatically. When given, this flag’ll make Ame output usage information of the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#version-class-method To actually run the command, all you need to do is invoke Rm.process This’ll invoke the command using the command-line arguments stored in ‹ARGV›, but you can also specify other ones if you want to: Rm.process 'rm', %w[-r /tmp/*] The first argument to #process¹ is the name of the method to invoke, which defaults to ‹File.basename($0)›, and the second argument is an Array of Strings that should be processed as command-line arguments passed to the command. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#process-class-method If you’d store the complete ‹Rm› class defined above in a file called ‹rm› and add ‹#! /usr/bin/ruby -w› at the beginning and ‹Rm.process› at the end, you’d have a fully functional ‹rm› command (after making it executable). Let’s see it in action: % rm --help Usage: rm [OPTIONS]... FILE... Remove directory entries Arguments: FILE... File to remove Options: -R Remove file hierarchies -f Do not prompt for confirmation --help Display help for this method -i Prompt for confirmation -r Equivalent to -R --version Display version information % rm --version rm 1.0.0 Some commands are more complex than ‹rm›. For example, ‹git›¹ has a rather complex command-line interface. We won’t mimic it all here, but let’s introduce the rest of the Ame API using a fake ‹git› clone as an example. ¹ See http://git-scm.com/docs/ ‹Git› uses sub-commands to achieve most things. Implementing sub-commands with Ame is done using a “dispatch”. We’ll discuss dispatches in more detail later, but suffice it to say that a dispatch delegates processing to a child class that’ll handle the sub-command in question. We begin by defining our main ‹git› command using a class called ‹Git› under the ‹Git::CLI› namespace: module Git end class Git::CLI &lt; Ame::Root version '1.0.0' class Git &lt; Ame::Class description 'The stupid content tracker' def initialize; end We’re setting things up to use the ‹Git› class as a dispatch in the ‹Git::CLI› class. The description on the ‹initialize› method will be used as a description of the ‹git› dispatch command itself. Next, let’s add the ‹format-patch›¹ sub-command: description 'Prepare patches for e-mail submission' flag ?n, 'numbered', false, 'Name output in [PATCH n/m] format' flag ?N, 'no-numbered', nil, 'Name output in [PATCH] format' do |options| options['numbered'] = false end toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' flag '', 'no-thread', nil, 'Disables addition of In-Reply-To and Reference headers' do |options, _| options.delete 'thread' end option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' def format_patch(since = '', options = {}) p since, options end ¹ See http://git-scm.com/docs/git-format-patch/ We’re using quite a few new Ame commands here. Let’s look at each in turn: toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' A “toggle”¹ is a flag that also has an inverse. Beyond the flags ‘s’ and “signoff”, the toggle also defines “no-signoff”, which will set “signoff” to false. This is useful if you want to support configuration files that set “signoff”’s default to true, but still allow it to be overridden on the command line. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#toggle-class-method When using the short form of a toggle (and flag and switch), multiple ones may be juxtaposed after the initial one. For example, “‹-sn›” is equivalent to “‹-s -n›” to “git format-patch›”. switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' A “switch”¹ is an option that takes an optional argument. This allows you to have separate defaults for when the switch isn’t present on the command line and for when it’s given without an argument. The third argument to a switch is the name of the argument. We’re also introducing a new concept here in ‹Ame::Types::Enumeration›. An enumeration² allows you to limit the allowed input to a set of Symbols. An enumeration also has a default value in the first item to its constructor (which is aliased as ‹.[]›). In this case, the “thread” switch defaults to nil, but, when given, will default to ‹:shallow› if no argument is given. If an argument is given it must be either “shallow” or “deep”. A switch isn’t required to take an enumeration as its argument default and can take any kind of default value for its argument that Ame knows how to handle. We’ll look at this in more detail later, but know that the type of the default value will be used to inform Ame how to parse a command-line argument into a Ruby value. An argument to a switch must be given, in this case, as “‹--thread=deep›” on the command line. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#switch-class-method ² See http://disu.se/software/ame-1.0/api/user/Ame/Types/Enumeration/ option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' An “option”¹ is an option that takes an argument. The argument must always be present and may be given, in this case, as “‹--start-number=2›” or “‹--start-number 2›” on the command line. For a short-form option, anything that follows the option is seen as an argument, so assuming that “start-number” also had a short name of ‘S’, “‹-S2›” would be equivalent to “‹-S 2›”, which would be equivalent to “‹--start-number 2›”. Note that “‹-snS2›” would still work as expected. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#option-class-method multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' A “multioption”¹ is an option that takes an argument and may be repeated any number of times. Each argument will be added to an Array stored in the Hash that maps option names to their values. Instead of taking a default argument, it takes a type for the argument (String, in this case). Again, types are used to inform Ame how to parse command-line arguments into Ruby values. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#multioption-class-method optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' An “optional”¹ argument is an argument that isn’t required. If it’s not present on the command line it’ll get its default value (the String ‹'N/A'›, in this case). ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#optional-class-method We’ve now covered all kinds of options and one new kind of argument. There are three more types of argument (one that we’ve already seen and two new) that we’ll look into now: “argument”, “splat”, and “splus”. description 'Annotate file lines with commit information' argument 'FILE', String, 'File to annotate' def annotate(file) p file end An “argument”¹ is an argument that’s required. If it’s not present on the command line, an error will be raised (and by default reported to the terminal). As it’s required, it doesn’t take a default, but rather a type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#argument-class-method description 'Add file contents to the index' splat 'PATHSPEC', String, 'Files to add content from' def add(paths) p paths end A “splat”¹ is an argument that’s not required, but may be given any number of times. The type of a splat is the type of one argument and the type of a splat as a whole is an Array of values of that type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splat-class-method description 'Display gitattributes information' splus 'PATHNAME', String, 'Files to list attributes of' def check_attr(paths) p paths end A “splus”¹ is an argument that’s required, but may also be given any number of times. The type of a splus is the type of one argument and the type of a splus as a whole is an Array of values of that type. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#splus-class-method Now that we’ve seen all kinds of options and arguments, let’s look on an additional tool at our disposal, the dispatch¹. class Remote &lt; Ame::Class description 'Manage set of remote repositories' def initialize; end description 'Shows a list of existing remotes' flag 'v', 'verbose', false, 'Show remote URL after name' def list(options = {}) p options end description 'Adds a remote named NAME for the repository at URL' argument 'name', String, 'Name of the remote to add' argument 'url', String, 'URL to the repository of the remote to add' def add(name, url) p name, url end end ¹ See http://disu.se/software/ame-1.0/api/user/Ame/Class#dispatch-class-method Here we’re defining a child class to Git::CLI::Git called “Remote” that doesn’t introduce anything new. Then we set up the dispatch: dispatch Remote, :default =&gt; 'list' This adds a method called “remote” to Git::CLI::Git that will dispatch processing of the command line to an instance of the Remote class when “‹git remote›” is seen on the command line. The “remote” method expects an argument that’ll be used to decide what sub-command to execute. Here we’ve specified that in the absence of such an argument, the “list” method should be invoked. We add the same kind of dispatch to Git under Git::CLI: dispatch Git and then we’re done. Here’s all the previous code in its entirety: module Git end class Git::CLI &lt; Ame::Root version '1.0.0' class Git &lt; Ame::Class description 'The stupid content tracker' def initialize; end description 'Prepare patches for e-mail submission' flag ?n, 'numbered', false, 'Name output in [PATCH n/m] format' flag ?N, 'no-numbered', nil, 'Name output in [PATCH] format' do |options| options['numbered'] = false end toggle ?s, 'signoff', false, 'Add Signed-off-by: line to the commit message' switch '', 'thread', 'STYLE', nil, Ame::Types::Enumeration[:shallow, :deep], 'Controls addition of In-Reply-To and References headers' flag '', 'no-thread', nil, 'Disables addition of In-Reply-To and Reference headers' do |options, _| options.delete 'thread' end option '', 'start-number', 'N', 1, 'Start numbering the patches at N instead of 1' multioption '', 'to', 'ADDRESS', String, 'Add a To: header to the email headers' optional 'SINCE', 'N/A', 'Generate patches for commits after SINCE' def format_patch(since = '', options = {}) p since, options end description 'Annotate file lines with commit information' argument 'FILE', String, 'File to annotate' def annotate(file) p file end description 'Add file contents to the index' splat 'PATHSPEC', String, 'Files to add content from' def add(paths) p paths end description 'Display gitattributes information' splus 'PATHNAME', String, 'Files to list attributes of' def check_attr(paths) p paths end class Remote &lt; Ame::Class description 'Manage set of remote repositories' def initialize; end description 'Shows a list of existing remotes' flag 'v', 'verbose', false, 'Show remote URL after name' def list(options = {}) p options end description 'Adds a remote named NAME for the repository at URL' argument 'name', String, 'Name of the remote to add' argument 'url', String, 'URL to the repository of the remote to add' def add(name, url) p name, url end end dispatch Remote, :default =&gt; 'list' end dispatch Git end If we put this code in a file called “git” and add ‹#! /usr/bin/ruby -w› at the beginning and ‹Git::CLI.process› at the end, you’ll have a very incomplete git command-line interface on your hands. Let’s look at what some of its ‹--help› output looks like: % git --help Usage: git [OPTIONS]... METHOD [ARGUMENTS]... The stupid content tracker Arguments: METHOD Method to run [ARGUMENTS]... Arguments to pass to METHOD Options: --help Display help for this method --version Display version information Methods: add Add file contents to the index annotate Annotate file lines with commit information check-attr Display gitattributes information format-patch Prepare patches for e-mail submission remote Manage set of remote repositories % git format-patch --help Usage: git format-patch [OPTIONS]... [SINCE] Prepare patches for e-mail submission Arguments: [SINCE=N/A] Generate patches for commits after SINCE Options: -N, --no-numbered Name output in [PATCH] format --help Display help for this method -n, --numbered Name output in [PATCH n/m] format --no-thread Disables addition of In-Reply-To and Reference headers -s, --signoff Add Signed-off-by: line to the commit message --start-number=N Start numbering the patches at N instead of 1 --thread[=STYLE] Controls addition of In-Reply-To and References headers --to=ADDRESS* Add a To: header to the email headers % git remote --help Usage: git remote [OPTIONS]... [METHOD] [ARGUMENTS]... Manage set of remote repositories Arguments: [METHOD=list] Method to run [ARGUMENTS]... Arguments to pass to METHOD Options: --help Display help for this method Methods: add Adds a remote named NAME for the repository at URL list Shows a list of existing remotes § API The previous section gave an introduction to the whole user API in an informal and introductory way. For an indepth reference to the user API, see the {user API documentation}¹. ¹ See http://disu.se/software/ame-1.0/api/user/Ame/ If you want to extend the API or use it in some way other than as a command-line-interface writer, see the {developer API documentation}¹. ¹ See http://disu.se/software/ame-1.0/api/developer/Ame/ § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&amp;business=now@disu.se&amp;item_name=Ame § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/ame/issues § Authors Nikolai Weibull wrote the code, the tests, the documentation, and this README. § Licensing Ame is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

When making an api that uses objects that belong to another object, it is possible to create objects that don't belong to any object. What this gem does is it checks to make sure the id and type map to an object before creation and if it does not it will create an error on the record. If an object is imageable, no worries it still works!

Gem helps to do next things with your objects - check the type, make a conversions and work with hashes

Contains validators for date and time values, type checking.

U U extends Ruby’s Unicode support. It provides a string class called U::String with an interface that mimics that of the String class in Ruby 2.0, but that can also be used from both Ruby 1.8. This interface also has more complete Unicode support and never modifies the receiver. Thus, a U::String is an immutable value object. U comes with complete and very accurate documentation¹. The documentation can realistically also be used as a reference to the Ruby String API and may actually be preferable, as it’s a lot more explicit and complete than the documentation that comes with Ruby. ¹ See http://disu.se/software/u-1.0/api/ § Installation Install u with % gem install u § Usage Usage is basically the following: require 'u-1.0' a = 'äbc' a.upcase # ⇒ 'äBC' a.u.upcase # ⇒ 'ÄBC' That is, you require the library, then you invoke #u on a String. This’ll give you a U::String that has much better Unicode support than a normal String. It’s important to note that U only uses UTF-8, which means that #u will try to #encode the String as such. This shouldn’t be an issue in most cases, as UTF-8 is now more or less the universal encoding – and rightfully so. As U::Strings¹ are immutable value objects, there’s also a U::Buffer² available for building U::Strings efficiently. See the API³ for more complete usage information. The following sections will only cover the extensions and differences that U::String exhibit from Ruby’s built-in String class. ¹ See http://disu.se/software/u-1.0/api/U/String/ ² See http://disu.se/software/u-1.0/api/U/Buffer/ ³ See http://disu.se/software/u-1.0/api/ § Unicode Properties There are quite a few property-checking interrogators that let you check if all characters in a U::String have the given Unicode property: • #alnum?¹ • #alpha?² • #assigned?³ • #case_ignorable?⁴ • #cased?⁵ • #cntrl?⁶ • #defined?⁷ • #digit?⁸ • #graph?⁹ • #newline?¹⁰ • #print?¹¹ • #punct?¹² • #soft_dotted?¹³ • #space?¹⁴ • #title?¹⁵ • #valid?¹⁶ • #wide?¹⁷ • #wide_cjk?¹⁸ • #xdigit?¹⁹ • #zero_width?²⁰ ¹ See http://disu.se/software/u-1.0/api/U/String/#alnum-p-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#alpha-p-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#assigned-p-instance-method ⁴ See http://disu.se/software/u-1.0/api/U/String/#case_ignorable-p-instance-method ⁵ See http://disu.se/software/u-1.0/api/U/String/#cased-p-instance-method ⁶ See http://disu.se/software/u-1.0/api/U/String/#cntrl-p-instance-method ⁷ See http://disu.se/software/u-1.0/api/U/String/#defined-p-instance-method ⁸ See http://disu.se/software/u-1.0/api/U/String/#digit-p-instance-method ⁹ See http://disu.se/software/u-1.0/api/U/String/#graph-p-instance-method ¹⁰ See http://disu.se/software/u-1.0/api/U/String/#newline-p-instance-method ¹¹ See http://disu.se/software/u-1.0/api/U/String/#print-p-instance-method ¹² See http://disu.se/software/u-1.0/api/U/String/#punct-p-instance-method ¹³ See http://disu.se/software/u-1.0/api/U/String/#soft_dotted-p-instance-method ¹⁴ See http://disu.se/software/u-1.0/api/U/String/#space-p-instance-method ¹⁵ See http://disu.se/software/u-1.0/api/U/String/#title-p-instance-method ¹⁶ See http://disu.se/software/u-1.0/api/U/String/#valid-p-instance-method ¹⁷ See http://disu.se/software/u-1.0/api/U/String/#wide-p-instance-method ¹⁸ See http://disu.se/software/u-1.0/api/U/String/#wide_cjk-p-instance-method ¹⁹ See http://disu.se/software/u-1.0/api/U/String/#xdigit-p-instance-method ²⁰ See http://disu.se/software/u-1.0/api/U/String/#zero_width-p-instance-method Similar to these methods are • #folded?¹ • #lower?² • #upper?³ which check whether a ‹U::String› has been cased in a given manner. ¹ See http://disu.se/software/u-1.0/api/U/String/#folded-p-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#lower-p-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#upper-p-instance-method There’s also a #normalized?¹ method that checks whether a ‹U::String› has been normalized on a given form. ¹ See http://disu.se/software/u-1.0/api/U/String/#normalized-p-instance-method You can also access certain Unicode properties of the characters of a U::String: • #canonical_combining_class¹ • #general_category² • #grapheme_break³ • #line_break⁴ • #script⁵ • #word_break⁶ ¹ See http://disu.se/software/u-1.0/api/U/String/#canonical_combining_class-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#general_category-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#grapheme_break-instance-method ⁴ See http://disu.se/software/u-1.0/api/U/String/#line_break-instance-method ⁵ See http://disu.se/software/u-1.0/api/U/String/#script-instance-method ⁶ See http://disu.se/software/u-1.0/api/U/String/#word_break-instance-method § Locale-specific Comparisons Comparisons of U::Strings respect the current locale (and also allow you to specify a locale to use): ‹#&lt;=&gt;›¹, #casecmp², and #collation_key³. ¹ See http://disu.se/software/u-1.0/api/U/String/#comparison-operator ² See http://disu.se/software/u-1.0/api/U/String/#casecmp-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#collation_key-instance-method § Additional Enumerators There are a couple of additional enumerators in #each_grapheme_cluster¹ and #each_word² (along with aliases #grapheme_clusters³ and #words⁴). ¹ See http://disu.se/software/u-1.0/api/U/String/#each_grapheme_cluster-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#each_word-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#grapheme_clusters-instance-method ⁴ See http://disu.se/software/u-1.0/api/U/String/#words-instance-method § Unicode-aware Sub-sequence Removal #Chomp¹, #chop², #lstrip³, #rstrip⁴, and #strip⁵ all look for Unicode newline and space characters, rather than only ASCII ones. ¹ See http://disu.se/software/u-1.0/api/U/String/#chomp-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#chop-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#lstrip-instance-method ⁴ See http://disu.se/software/u-1.0/api/U/String/#rstrip-instance-method ⁵ See http://disu.se/software/u-1.0/api/U/String/#strip-instance-method § Unicode-aware Conversions Case-shifting methods #downcase¹ and #upcase² do proper Unicode casing and the interface is further augmented by #foldcase³ and #titlecase⁴. #Mirror⁵ and #normalize⁶ do conversions similar in nature to the case-shifting methods. ¹ See http://disu.se/software/u-1.0/api/U/String/#downcase-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#upcase-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#foldcase-instance-method ⁴ See http://disu.se/software/u-1.0/api/U/String/#titlecase-instance-method ⁵ See http://disu.se/software/u-1.0/api/U/String/#mirror-instance-method ⁶ See http://disu.se/software/u-1.0/api/U/String/#normalize-instance-method § Width Calculations #Width¹ will return the number of cells on a terminal that a U::String will occupy. #Center², #ljust³, and #rjust⁴ deal in width rather than length, making them much more useful for generating terminal output. #%⁵ (and its alias #format⁶) similarly deal in width. ¹ See http://disu.se/software/u-1.0/api/U/String/#width-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#center-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#ljust-instance-method ⁴ See http://disu.se/software/u-1.0/api/U/String/#rjust-instance-method ⁵ See http://disu.se/software/u-1.0/api/U/String/#modulo-operator ⁶ See http://disu.se/software/u-1.0/api/U/String/#format-instance-method § Extended Type Conversions Finally, #hex¹, #oct², and #to_i³ use Unicode alpha-numerics for their respective conversions. ¹ See http://disu.se/software/u-1.0/api/U/String/#hex-instance-method ² See http://disu.se/software/u-1.0/api/U/String/#oct-instance-method ³ See http://disu.se/software/u-1.0/api/U/String/#to_i-instance-method § News § 1.0.0 Initial public release! § Financing Currently, most of my time is spent at my day job and in my rather busy private life. Please motivate me to spend time on this piece of software by donating some of your money to this project. Yeah, I realize that requesting money to develop software is a bit, well, capitalistic of me. But please realize that I live in a capitalistic society and I need money to have other people give me the things that I need to continue living under the rules of said society. So, if you feel that this piece of software has helped you out enough to warrant a reward, please PayPal a donation to now@disu.se¹. Thanks! Your support won’t go unnoticed! ¹ Send a donation: https://www.paypal.com/cgi-bin/webscr?cmd=_donations&amp;business=now@disu.se&amp;item_name=U § Reporting Bugs Please report any bugs that you encounter to the {issue tracker}¹. ¹ See https://github.com/now/u/issues § Authors Nikolai Weibull wrote the code, the tests, the documentation, and this README. § Licensing U is free software: you may redistribute it and/or modify it under the terms of the {GNU Lesser General Public License, version 3}¹ or later², as published by the {Free Software Foundation}³. ¹ See http://disu.se/licenses/lgpl-3.0/ ² See http://gnu.org/licenses/ ³ See http://fsf.org/

check flirt by blood type

A Gem to get files Header, Footer, Type(via headers), create file checksum, check file checksum, Carving and ... .

Gem to parse Facebook ID's from various Facebook URL types. The five link types are: Status, Photo, Video, Link, Checkin.

Checks for valid content type of excel files.

Reliable contract definition, data validation, and type checking for Ruby.

# Gadget Some methods for getting metadata and other deep details from a PostgreSQL database. ## Installation Add this line to your application's Gemfile: gem 'gadget' And then execute: $ bundle Or install it yourself as: $ gem install gadget ## Usage `#tables(conn)` Returns a list of all tables in the schema reachable through `conn`. `#columns(conn, tablename=nil)` Returns a list of all columns in the schema reachable through `conn`. If `tablename` is given, returns the columns in only that table. `#foreign_keys(conn, tablename=nil)` Returns a list of all foreign keys in the schema reachable through `conn`. If `tablename` is given, returns the foreign keys in only that table. `#constraints(conn, tablename=nil)` Returns a list of all constraints in the schema reachable through `conn`. If `tablename` is given, returns the constraints in only that table. `#dependencies(conn)` Returns a structure representing the dependencies between tables in the schema reachable through `conn`. Table A is defined as dependent on table B if A contains a foreign key reference to B. `#tables_in_dependency_order(conn)` Returns a list of all tables in the schema reachable through `conn`, ordered such that any given table appears later in the list than all of its dependencies. `#dependency_graph(conn)` Returns `.dot` script (suitable for feeding into Graphviz) describing the table dependency graph. `#functions(conn)` Returns a list of all functions in the schema reachable through `conn`. `#sequences(conn)` Returns a list of all sequences in the schema reachable through `conn`. `#triggers(conn)` Returns a list of all triggers in the schema reachable through `conn`. `#types(conn)` Returns a list of all types in the schema reachable through `conn`. ## Contributing 1. Fork it 2. Create your feature branch (`git checkout -b my-new-feature`) 3. Commit your changes (`git commit -am 'Add some feature'`) 4. Push to the branch (`git push origin my-new-feature`) 5. Create new Pull Request

This gem with asks user input for there state name, then will prompt the use to type there city they would like to check the daily weather of."

A rich language which compiles to ruby. Including type annotations, type checking, macros, annotations, enums and more

QuacksLike is a module for RSpec to add matchers that test if an object is fully duck-typed to pretend to be another class. This kind of thing is really only necessary when passing such an object as the return value in an API where you don't know exactly how it will be consumed, but it needs to "quack like an Array" or something. It does its job by checking every instance method in the class that the target object needs to "quack like" and makes sure the target both responds to that method name and that the arity of the method is appropriate.